terribleturner Posted October 8, 2006 Share Posted October 8, 2006 I know it's not neccasary as you have your left foot, but can you use the AEM launch control on an Auto?? Quote Link to comment Share on other sites More sharing options...
JamieP Posted October 8, 2006 Share Posted October 8, 2006 Hmmmm ....I would not think so:search: Quote Link to comment Share on other sites More sharing options...
terribleturner Posted October 8, 2006 Author Share Posted October 8, 2006 Oh well I just want the cracking and banging. With my high stall i can load the car up to just below 4k anyway, but means having to use the brake which you can't hold for too long so as not to boil the fluid Quote Link to comment Share on other sites More sharing options...
Homer Posted October 9, 2006 Share Posted October 9, 2006 If you set the launch control rpm below 4k rpm then I can't see why this wouldn't be possible - the launch control works from engine RPM, not box so provided the engine is running at that required rpm and the rear wheels are stationary I don't see why it won't work (Unless the AEM launch system is more complex than others, but don't see why it should be in term of motion detection since almost all work off ABS sensors.) If you're held at the line the fluid will cook though! Quote Link to comment Share on other sites More sharing options...
Muffleman Posted October 9, 2006 Share Posted October 9, 2006 Oh well I just want the cracking and banging. It is cool Quote Link to comment Share on other sites More sharing options...
Sheefa Posted October 9, 2006 Share Posted October 9, 2006 What about Racelogic guys? I'm having the system fitted and it comes with the Digi Adj and Launch Control but can this be used for an Auto without further mods or do I need a 'hi-stall' whatever the hell it is thing!? Cheers, Greg. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.