Problems after fitting clock faces

[morgaine]

Hi all

Hubby's just fitted my white dial faces and I'm having problems.

Drove to work, all well, and looking awesome.

On the way home, speedo not working, rev counter sticking, fuel and temp working fine.

Hubby took needles back off and on, went into work, all working.

Came home, same again.

Wat have we stuffed up???

Cheers

Morg

[Guru]

Not sure you're meant to take the needles off.......

[Mas]

He/you pushed the needles too far in, the Rev counter needle specially is like that Im having mine done and I had the same problem yesterday but now is ok, just take the needles off using 2 tea spoons (incase you brake them like I did :( ) or just pull them back a but and Im sure it will be sorted.

[Mike]

This might help (http://www.internetwork.org.uk/clocks.htm).. :)

[wkdtime]

Another thing to consider is that if you have taken the needles off, it might be worth while to see if theyre still accurate, if not then you will need to callibrate them, Rev meter is easy to do and the speedo a little trickier.