Boost guage in the TT.

Im thinking of buying the 52mm Greddy electronical boost guage.

http://www.mkivstore.com/index.php?target=products&product_id=1671

Will this run on its own, it doesnt need a group of them?

Also will this fit where the clock is on the dash of the supe?

Am i better going for a 60mm one? Will this only fit in the air vent?

Any advice or help, what would you buy if you where me? I dont really want the guages on the a-pillar!

Thanks:d

From what I've heard, a 52mm gauge will fit where the clock is perfectly.

Yes you can use that gauge on its own, it has its own boost pressure sensor that comes packaged with it, this is the difference between mechanical gauges and electronic ones.

Argh right thanks so it must be more accurate then, think i may go for the 52mm then in the clock position.

Yup, the electronic is more accurate and faster response.

No real difference in terms of accuracy between mechanical and electronic. The main difference between them is that on electronic gauages you will usually get features such as warning light, peak hold and record and play back.

As said, 52mm can fit in place of the clock, 60mm can fit inside the airvent. If the only gauge you need is boost and you do not want a pillar pod, then I would get either a 52mm or 60mm and fit either where the clock is or where the air vent is. There is a much bigger choice of 60mm gauges, both mechanical or electronic, most of the 52mm gauges tend to be mechanical.

If you would like prices for any gauges drop mean email or pm.

Cheers Nic thanks!