Jump to content
The mkiv Supra Owners Club

Is it worth going to kwik-fit?


markymark
 Share

Recommended Posts

My exhaust is blowing from the down pipe. I tried everything to undo the two bolts at the join but cannot get any leverage to undo them. I've tried every tool I've got but i reckon I need the vehicle on ramps with an air gun on a long extension. Is it worth me going to these people or does anyone know anyone near Rainham in Essex that can have a look at it for me without charging the earth to do so? Forgot to add - I have checked & it's not cracked.

Link to comment
Share on other sites

Kwik-fit are much more likely to have experience of doing this type of work than Brian's 'local garage'. I go to kwik-fit for diffcult front decats and oil changes and find the 'spotty morons' there more than helpful and adequately skilled to do the job.

 

Not sure which joint you are talking about though. The joint between first and second cat has two bolts but are easy to get at. Where the first cat bolts to the turbo downpipe is three bolts.

Link to comment
Share on other sites

Oh I see.

No offence mate but it would help if you said what type of Supra we're talking about when asking technical questions. Or put it in your Sig.

 

I've never worked on a NA yet so don't feel qualified to answer.

 

 

your dead right so i should:twak:

Link to comment
Share on other sites

Went to a local Quick Fit for my decat, and glad i did as i suspected at least one stud sheared and had to be re taped, and they where all a pain to get undone, also had to get a torch on the decat as it sat to high, so all in all 30 quid well spent, and surprisingly enough they weren't spotty twats, they where very helpful and knew what they where about! one owned a Renault Alpine and another a 300ZX.

Link to comment
Share on other sites

Went to a local Quick Fit for my decat, and glad i did as i suspected at least one stud sheared and had to be re taped, and they where all a pain to get undone, also had to get a torch on the decat as it sat to high, so all in all 30 quid well spent, and surprisingly enough they weren't spotty twats, they where very helpful and knew what they where about!
Yeah, I had the same thing decatting a VVTi a while back. Snapped manifold studs = drilling, retapping :eek: Not the kind of thing you want to do on your driveway and not what you want to pay a garage £60/Hr to sort out.

2 hours later I gave the KwikFit guy £40 cash, he put it in his pocket and was over the moon!

Win/Win!

 

I gave him a ride home in the Supra because he'd missed his lift due to staying on and finishing my car. He was loving it! Can't do enough for me now.... £20 cash Mobil1 fully synth oil changes? Oh go on then! :sly:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.