Supra-Dupra Posted July 20, 2006 Share Posted July 20, 2006 If you upgrade disks, can you use the stock callipers ? A friend is in need of new disks and has been offered them cheap enough. He has a j-spec n/a. new disks would be 3.25" Quote Link to comment Share on other sites More sharing options...
Jake Posted July 20, 2006 Share Posted July 20, 2006 You can't use UK discs with j-spec calipers, if that's what you're asking Quote Link to comment Share on other sites More sharing options...
Supra-Dupra Posted July 20, 2006 Author Share Posted July 20, 2006 ebc drilled and grooved, they measuring 3.25" width ! he has 1" clearance from the calliper to rim. Just if he ends up having to buy callipers the price works out not so good as buying a complete package! Dont think they will myself but just want it confirmed. Quote Link to comment Share on other sites More sharing options...
ChrisSZ Posted July 20, 2006 Share Posted July 20, 2006 Which part measures 3.25" mate?? Basically speaking, if they don't measure the same (all ways) as the original discs then there's no chance they are gonna go on. You need to check the diameter, thickness and top hat depth (the sticky-up bit where the bolt holes are. Quote Link to comment Share on other sites More sharing options...
Supra-Dupra Posted July 20, 2006 Author Share Posted July 20, 2006 Which part measures 3.25" mate?? Basically speaking, if they don't measure the same (all ways) as the original discs then there's no chance they are gonna go on. You need to check the diameter, thickness and top hat depth (the sticky-up bit where the bolt holes are. stock are 2.25", and these are 3.25" outter edge of the disk to the inner edge(just above hub). But anyway that cleared it up as there 1" more, so they obviously wont fit ! Quote Link to comment Share on other sites More sharing options...
ChrisSZ Posted July 20, 2006 Share Posted July 20, 2006 as there 1" more, so they obviously wont fit ! Correct Quote Link to comment Share on other sites More sharing options...
Supra-Dupra Posted July 20, 2006 Author Share Posted July 20, 2006 chris and jake thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.