Whifbitz decat pipe special offer

[Paul Whiffin]

I'm running a special offer price for 1 month starting from today on my Jap Spec twin turbo pre-VVTi full decat pipes. These are 2.5" stainless steel complete with restrictor ring. Normal price is £185 + VAT.

Special offer price is £135 + VAT, delivery is £15 + VAT on top if required.

We can fit them for £50 if needed as well.

Got loads in stock here ready to go.


Cheers
Paul

[Bob]

Don't suppose there's any specials on just the 1st decat is there? I'm after 3" if possible.

[Paul Whiffin]

Afraid not, just the 2.5" full decats at the moment.

[flyin_scouseman]

Hi, I have a standard jap spec TT supra. I am planning on keeping it a TT even if i upgrade later. Will the pipe diameter be sufficient if i upgrade engine in future and what power is it capable of withstanding. The reason i ask is that ppl are mentioning 3" decats pipes and the decat you are selling is 2.5".... is this an all in one pipe instead of having to buy 1st and 2nd decats pipes? Sorry to sound like a noob :D

[flyin_scouseman]

Sorry i almost forgot to mention, If this is a double decat pipe and it produces more power what other upgrades will i need in order for my motor to run correctly? Do you supply these parts too? Reason i ask is that i read the decat article from Ian C, saying about pumps and plugs etc. If you could help me out i would be forever grateful ;)
Cheers, Andy.

[LeeT]

Sorry i almost forgot to mention, If this is a double decat pipe and it produces more power what other upgrades will i need in order for my motor to run correctly? Do you supply these parts too? Reason i ask is that i read the decat article from Ian C, saying about pumps and plugs etc. If you could help me out i would be forever grateful ;)
Cheers, Andy.
do a search on the forum on BPU

[flyin_scouseman]

What power is the 2.5" good for? Can i achieve upto 600 BHP in future if i upgrade other components with this decat or would i have to plump for a 3" diamater decat? If all is good i will be ordering one of these plus an FCD and a Walbro fuel pump matey. Cheers, Andy. ;)

[tDR]

You won't get close to 600bhp on stock twins Andy so it's irrelevant IMO - you'll need a different downpipe to mate with a single turbo to achieve that kinda power.

Cheers,

Brian.

[Paul Whiffin]

Sorry i almost forgot to mention, If this is a double decat pipe and it produces more power what other upgrades will i need in order for my motor to run correctly? Do you supply these parts too? Reason i ask is that i read the decat article from Ian C, saying about pumps and plugs etc. If you could help me out i would be forever grateful ;)
Cheers, Andy.

Hi Andy, you should fit a fuel cut defencer, colder grade spark plugs and an uprated fuel pump, I can supply all of these parts with the decat pipes of course.


Cheers
Paul

[chilli]

got these de-cat pipes on my car and I can vouch that it is very well made and a perfect fit - a real bargain at this price!

[flyin_scouseman]

Hi again :d , Cheers Chilli ;) does the pipe nearest the engine have a wideband o2 plug for accurate fueling checks as i've read that this is important for proper boosting/idling/fuelling etc? Sorry, also forgot to ask, can you supply TRL FCDs Paul. Cheers, Andy

[flyin_scouseman]

You won't get close to 600bhp on stock twins Andy so it's irrelevant IMO - you'll need a different downpipe to mate with a single turbo to achieve that kinda power.

Cheers,

Brian.

Hi matey, It's not that i will be going the way of the single turbo.... i was hoping to stay on the path of TT like hybrids in future or something which is a hell of a long way away yet :( but just so i don't have to buy a 3" decat after buying a 2.5" ;)

[tDR]

Hybrids are also a waste of money m8 - more lag for little power gain. The only real reason to buy them I can see is longevity because they will have steel rather than ceramic internals. The 2.5" decat will never be the restriction on power where stock based turbo's are concerned.

[Paul Whiffin]

Hi again :d , Cheers Chilli ;) does the pipe nearest the engine have a wideband o2 plug for accurate fueling checks as i've read that this is important for proper boosting/idling/fuelling etc? Sorry, also forgot to ask, can you supply TRL FCDs Paul. Cheers, Andy

It doesn't but I can have put in for a small extra cost. You wont need to check the fuelling though unless your going to be fitting ecu/injectors/turbos though, either way its not a problem anyway, it can be done for you if required.
TRL FCD in stock yes.


Cheers
Paul

[flyin_scouseman]

Ok Paul m8 lets get the ball rollin' then and can ya sort that o2 plug matey ;) i will be forever grateful i'll also need a new Walbro and cold spark plugs to suit the mods. :) Can you PM me a price Matey and we can sort it from there :thumbs: i might also want one of them there Greddy top radiator coolant pipes(mmm nice and shiney) :p

[supra-lover]

any for my n/a???????

[Trig]

any for my n/a???????

ditto!

[Paul Whiffin]

Afraid not chaps, only for the Jap spec twin turbo model I'm afraid.
I can do a group buy if I can get enough people interested though, need 10 show of hands to do it

[MarkTheBoy]

PM'd

cheers

[BASHTHEBISHOP]

Hi Andy, you should fit a fuel cut defencer, colder grade spark plugs and an uprated fuel pump, I can supply all of these parts with the decat pipes of course.
Cheers
Paul

Hi Paul

What can you do an all in price on this lot for then inc decat pipe? (assuming irridium plugs and a walbro pump)

And how much all fitted?

PM me if you prefer.

Thanks
Mark

[Paul Whiffin]

Hi Paul

What can you do an all in price on this lot for then inc decat pipe? (assuming irridium plugs and a walbro pump)

And how much all fitted?

PM me if you prefer.

Thanks
Mark

PM'd u

[Paul Whiffin]

Only 7 days to go on this offer boys, they will be going back up to £185 + VAT for these....

[Paul Whiffin]

This offer has now ended, well not quite yet, you have another 2 hours 15 minutes left!