EddyS Posted July 4, 2006 Share Posted July 4, 2006 Hi, sorry for the poor quality, but just thought i'd show you my J-Spec TT Auto, and the mesh that I did at the weekend. I didnt want to remove the bumper to fit the mesh, so just cut a piece out and secured it with the black strip on the bottom. Pics attached...(I hope) Quote Link to comment Share on other sites More sharing options...
imi Posted July 4, 2006 Share Posted July 4, 2006 are you going to do the side pods and also the rear side pods Quote Link to comment Share on other sites More sharing options...
EddyS Posted July 4, 2006 Author Share Posted July 4, 2006 are you going to do the side pods and also the rear side pods I cant see a way of doing the side bits in the bumper without removing it? Rear side pods.....do you mean the holes in the skirt? Hadn't thought about doing those, might do though Quote Link to comment Share on other sites More sharing options...
Mike Posted July 4, 2006 Share Posted July 4, 2006 you can't see in those anyway can you....? and they got vents on the inside to catch 'stuff'... Quote Link to comment Share on other sites More sharing options...
i-macca Posted July 4, 2006 Share Posted July 4, 2006 I think the vents are more to direct air to places. On the UK cars the diff cooler is in front of this vent thing and gets assaulted with all kinds of crap, hence most of them have holes in various places! Bumper looks good, I was thinking of doing this to mine just in the middle as it's pretty unsightly with all the pipes and coolers behind it, looks a mess.. Just that mesh is stupidly expensive for small pieces Quote Link to comment Share on other sites More sharing options...
theyoungeone Posted July 4, 2006 Share Posted July 4, 2006 Hey EDDYS what the hight of the mesh ??? between the two points where you have bent the top and the botom to over lap the bumper ?? if you understand. Quote Link to comment Share on other sites More sharing options...
toyotatom Posted July 4, 2006 Share Posted July 4, 2006 you can't see in those anyway can you....? and they got vents on the inside to catch 'stuff'... Nothing quite catches roadside crap like Veilside skirts mate. You should have seen what was in the back of mine when I took them off!! Quote Link to comment Share on other sites More sharing options...
EddyS Posted July 5, 2006 Author Share Posted July 5, 2006 Hey EDDYS what the hight of the mesh ??? between the two points where you have bent the top and the botom to over lap the bumper ?? if you understand. Yeah i understand what you mean, I cant remember off the top of my head but i've got the template at home, so i'll have a look. Quote Link to comment Share on other sites More sharing options...
EddyS Posted July 5, 2006 Author Share Posted July 5, 2006 Just that mesh is stupidly expensive for small pieces I got mine from a local fabrications company, they had big sheets of it that were scrap.....still charged me £20 for it mind, it was about 4ft square. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.