optima battery securing

[lockys96]

Right lads, i have just fitted a new optima orange top this morning, after the probs i was having with the old one, its starts up so quickly, yay.

one problem is that securing the battery, using the standard battery thing, nothing comes into contact with it, so i can not tighten it down,

anyone else using a optima battery, if so what have you used to secure it,

plus the revs seem to have dropped a little bit when stationary sitting at lights, seems very close to stall, but not quite, any reasons?

Thankyou please:p



si

[RobSheffield]

i have an Optima battery, and put a smal piece of wood between the stock holder and battery - loks very bling i must say :)

im selling 'small bits of wood' for 39.95, have lots available :)

[lui]

i have an Optima battery, and put a smal piece of wood between the stock holder and battery - loks very bling i must say :)

im selling 'small bits of wood' for 39.95, have lots available :)
i have optima too i put one of those curved rubbder sanding blocks on mine under the stock holder & it doed not look to bad better than a piece of 2 X 2 :d :d :d

37444

[lockys96]

lol,

make sure you use ronseal

[lockys96]

ill prob get something fabricated