mikeyb10supra Posted June 6, 2006 Share Posted June 6, 2006 Hi Guys I am going to get a custom cast iron manifold fabricated in the near future with t4 flange, but am unsure about the part that houses the wastegate and how to describe what im after to the manufacturer?? is there an article on dimensions hanging around anywhere so I can get some ideas of what to ask for?? cheers Mike Quote Link to comment Share on other sites More sharing options...
Robert Posted June 6, 2006 Share Posted June 6, 2006 im sure one of the traders with a manifold in stock will help, all the t4 flanges are the same size so shouldnt be too difficult to get measurements. Quote Link to comment Share on other sites More sharing options...
SimonB Posted June 6, 2006 Share Posted June 6, 2006 There is no standard for wastegates. Why not just buy one of Arnout's manifolds? Quote Link to comment Share on other sites More sharing options...
Alex Posted June 6, 2006 Share Posted June 6, 2006 There is no standard for wastegates. Why not just buy one of Arnout's manifolds? Yeah Mig's got some in stock... And for the other thing...buy and HKS wastegate or whatever you want to use and give it to your fabricators they should be able to do the rest. And if you are going for a cast unit...make sure you look at other manifold for the Supra tubular or not and understand what's rated as good or bad etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.