wkdtime Posted June 2, 2006 Share Posted June 2, 2006 I have the following, http://www.maplin.co.uk/Module.aspx?ModuleNo=45931&criteria=blue%20led&doy=2m6 Got loads of them, will these be ok for the Blue dash conversion, I have both 3mm and 5mm ones. Let me know guys as i dont want to waste time soldering them in and not looking right. cheers Quote Link to comment Share on other sites More sharing options...
jamesmark Posted June 2, 2006 Share Posted June 2, 2006 Its amazing how cheap an LED conversion is. Quote Link to comment Share on other sites More sharing options...
wkdtime Posted June 2, 2006 Author Share Posted June 2, 2006 parts are relatively cheap, but its really labour intensive. Quote Link to comment Share on other sites More sharing options...
wkdtime Posted June 2, 2006 Author Share Posted June 2, 2006 Anyone know if the LED's i have will be fine? Quote Link to comment Share on other sites More sharing options...
heckler Posted June 2, 2006 Share Posted June 2, 2006 yep - there fine Quote Link to comment Share on other sites More sharing options...
Ben-san Posted June 2, 2006 Share Posted June 2, 2006 Got enough to do mine aswell then... Quote Link to comment Share on other sites More sharing options...
wkdtime Posted June 2, 2006 Author Share Posted June 2, 2006 Ben ill give it ago, i may go thorugh quite a few bulbs lol, i have plenty of resistors too, once finished will let you guys know how i got on, Heckler thanx for the advice mate, wicked instructions mate! Can send you the left overs ben;) Quote Link to comment Share on other sites More sharing options...
Ben-san Posted June 2, 2006 Share Posted June 2, 2006 If someone handed me a solder gun, I'd probably manage to shoot myself with it. I've been meaning to get Si to do mine for a while now, so may just get him to pop down sometime. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.