RPS Clutches

[JohnK]

Are they reworked Toyota?

[DaveMassie]

No, they are an aftermarket unit, i bought a stage one version for my ST205 Gt Four along with a fidanza flywheel, and it was excellent, the car was running 330hp and managed a 0-60 of 4.3 seconds at the J tuner magazine gt four thrash, so their good bits of kit!

[Paul Whiffin]

Very good clutches, sell and fit loads of them here, have been using them in my own Supra for 7 years now!

[JohnK]

So the cover plate shouldnt have toyota stamped on it?

They are not modified standard units?

RPS street btw.

[ndwgolf]

Very good clutches, sell and fit loads of them here, have been using them in my own Supra for 7 years now!
What spec would you recommend for 550 RWHP?

[TRD3000GT]

Stage 3..

Or if that BHP it as the wheels a Carbon Carbon as it will last for ever..

Im having problems as im over 600 bhp and my tyres are 315's so instead of breaking loose they give the clutch a hard time :)

[JohnK]

Back on topic please

[TRD3000GT]

The RPS stuff Ive had never had a toyota stamp on it ever..

Ive had reworked stuff as well, that did have it

[ndwgolf]

Stage 3..

Or if that BHP it as the wheels a Carbon Carbon as it will last for ever..

Im having problems as im over 600 bhp and my tyres are 315's so instead of breaking loose they give the clutch a hard time :)
Ive seen the Carbon Carbon on RPS's webpage but what a price????????????

[JohnK]

I think ive just found out, it does look like its a modified stock unit

[JohnK]

here is a pic, ive just altered the contrast to make to toyota stamp clearer.

[Chiefgroover]

The street disc is a re worked toyota unit, like CW's and many others I believe.

[jayssupra]

i bought the same clutch from envy performance and mine has the toyota stamp on it as well, i think its the springs that are upgraded.

[normore1]

John, the RPS pressure plate is a reworked Toyota unit. It is the same pressure plate that Toyota sells as the TRD Single Disk clutch which uses the standard Toyota organic disk. If the RPS pressure plate is combined with the "Street Disk" it is exactly the same as the TRD unit. Holds about 500HP and 500 Torque. RPS keeps the pressure plate and changes the disks (Stage 2 & 3) to get even more torque capacity.

[Gaz Walker]

As everyone says, street setup is OEM.

Gaz.