View Full Version : ice install
just starting on my ice install. im fitting 2 12" jbl subs and a 600w amp in the boot which im planning at the moment.
however i also have a set of pioneer 13cm 2 ways. will these go in the front?
is it worth it etc
i also have a pair of db audio 6x9 will these fir in the rear and as above is it worth it and how do i do it
cheers!
just starting on my ice install. im fitting 2 12" jbl subs and a 600w amp in the boot which im planning at the moment.
however i also have a set of pioneer 13cm 2 ways. will these go in the front?
is it worth it etc
i also have a pair of db audio 6x9 will these fir in the rear and as above is it worth it and how do i do it
cheers!
They will go in the front if you attach them to the door cards, you will have to ditch the standard boxes.
If i were you i would buy or make some of the speaker brackets that have been for sale on the forum the template is in the download section.
6x9's can be fitted in the rear, i imagine you would have to make an mdf template based on the shape of the 6x9 (you should have a template attached to the box)
Then attach said mdf template to the original metal speaker bracket.
The problem you may have with that is the plastic speaker covers won't fit back in to postion.
Personally i would save a bit of cash and buy some component speakers for the front.
And fit the 2 ways in the rear.
Hope that helps
jls-security
24-05-06, 11:15
Better option would be 6.5 components in the front mate. There are templates available on this site to download. I did and worked a treat.
vBulletin® v3.7.4, Copyright ©2000-2008, Jelsoft Enterprises Ltd.