Dragonball Posted May 11, 2006 Share Posted May 11, 2006 Just need to double check before producing some new top rad pipes and I think I chucked my old one... Anyone got their rad hose off please? (mine still at GVN til weekend) The outer diameter of the outlet from the rad to which the stock hose attached is...? Needed in mm and very accurate please as getting some nice clamps to go with these now and will only fit between specific mm diameter (oh and new silicon supplier too etc) Thanks for any input Cheers Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted May 11, 2006 Share Posted May 11, 2006 OD is 38mm from one of yours! its off because i welded a ss bumg to it for my temp sensor, and it leaks! as my welder is old and crap Quote Link to comment Share on other sites More sharing options...
AlanM Posted May 11, 2006 Share Posted May 11, 2006 Thats no way to talk about the poor man!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.