View Full Version : Vortex Power - Boost Logic Direct
OK guys as most of you know, the only official warrantied source of BL into the UK is Vortex. In light of the recent attempts at grey imports, we are changing the way BL products are being supplied to the UK.
From now on BL products will be delivered straight from BL to wherever you want, and payment will be direct to BL. BL will not deal direct with you guys so please dont ask as they all get refered to us. Please email terry@supravvti.com and we will arrange.
I have posted a new Boost Logic Direct price list here http://vortex-power.co.uk/forum/index.php?act=ST&f=45&t=489&st=0#entry3084. It’s not complete but gives you an idea ;)
This will mean unbeatable prices on BL kit, and the technical back up to match. You really can’t lose ;)
Crikey!
We is already liking those prices. Must resist! Will resist! :innocent:
resist? never!
you have PM Terry ;)
Nice prices ;)
I'd buy your snake oil over anyone else's anyday Terry :d
Nice prices ;)
I'd buy your snake oil over anyone else's anyday Terry :d
Thanks bud, mine works ;)
Ooooh,Aaaah.Some nice prices there mate.Wish I had some free £'s to spend.Maybe in a few months:cool:
Can recommend the T61 kit, makes for a blinding car :D Cheers terry ;)
tempting prices indeed. out of interest why are the larger turbos cheaper than the 71gts? is it purely because the 71 is more popular? could well be up for a 74 in a month or so
tempting prices indeed. out of interest why are the larger turbos cheaper than the 71gts? is it purely because the 71 is more popular? could well be up for a 74 in a month or so
71 uses an aluminium comp wheel mate.
veilsideTT
10-05-06, 23:17
Any chance of posting up the BL Torque Convertor price please?
Thanks
Scott
darren j adams
10-05-06, 23:20
Hi terry!!
Been virused and busy ,keep meaning to say hello and thanks for the inj..
Thanks D.
Scott will put it up later today if I remember.
Hi Darren, trust all is well with you and yours mate.
veilsideTT
11-05-06, 11:23
Thanks ;)
what about the dbb prices mate? and what the difference between an E cover and an S cover?
67 DBB comes in at about £900-00 but will double check. The E and S covers dictate the sizes of the intake on the compressor housing.
what the difference between an E cover and an S cover?
i think this is right???
just in case any one else is wondering, this is reference to the compressor cover sizing.
E cover = 3"in 2"out
S cover = 4"in 2.5" out
i think this is right???
just in case any one else is wondering, this is reference to the compressor cover sizing.
E cover = 3"in 2"out
S cover = 4"in 2.5" out
Whats the significance of those numbers? Larger giving more power? Smaller quicker spool?
Whats the significance of those numbers? Larger giving more power? Smaller quicker spool?
the sizes are the main intake pipe with the air filter on and the comp housing to throttle body one. i suppose that the narrower intake would become a restriction at higher horsepower levels
the sizes are the main intake pipe with the air filter on and the comp housing to throttle body one. i suppose that the narrower intake would become a restriction at higher horsepower levels
Ta! :)
veilsideTT
12-05-06, 23:01
Scott will put it up later today if I remember.
Any luck with the T/C price from BL terry?
Terry, what happened to the Vortex section ?????? :search:
And get me verified on your Vortex Forum will ya, very annoying feature for a newbie signing up, that you have to wait before you can browse...... :tongue:
:D ;)
Ash - planning to rip those hybrids out .. putting a single in there instead ? ;)
Ash - planning to rip those hybrids out .. putting a single in there instead ? ;)
FUCK, you can read minds........ :cool:
Not sure if I should do it before the re-spray or after, but prob after, until then I want laods of discussion to make sure I get the right setup, and lots of rides in peoples singles, so anyone with a 58,61, or 67, take me out - Pleeeease.......think a 71 would be too big and laggy, especially what LeeT was saying about his being fully spooled by just over 4k I think it was, shocking......
I'm not too far from you. If you want a ride in mine let me know. Mine is at full boost 1.4 Bar .. by about 3800.
Just got to get my E-Manage installed & mapped by magic mapper Chis. And then, the performance of the car should run better than the SAFC-2.
I'm not too far from you. If you want a ride in mine let me know. Mine is at full boost 1.4 Bar .. by about 3800.
Just got to get my E-Manage installed & mapped by magic mapper Chis. And then, the performance of the car should run better than the SAFC-2.
Dude, you dont need an invitation, gimme a call when ever your free, 07786982257 ;)
Any luck with the T/C price from BL terry?
You were going to pm me also?
The TC's work out £545-00 on the BL Direct deal. As terms as listed in the web link.
Hi terry can you supply parts of the bl na-t kit as well?
RobSheffield
04-03-07, 20:14
Wow
You blew the dust off this one :p
Hehe, a good sign that i used the search :p
Hi terry any chance of a price on the BL T67 stage 2 kit please?
No worries mate, as i said in the PM last night, BL are a little preoccupied, but I will PM you a very good ball park if that helps.
Terry,
Did you get my email?
And my PM :search:
Smarty, yup on it, Mr B can you resend it please mate.
Mr B can you resend it please mate.
Done :cool:
Hello Terry.
Did you get my PM?
Regards
Tomasz
vBulletin® v3.7.2, Copyright ©2000-2008, Jelsoft Enterprises Ltd.