Back lights for the Heater Controls all out.

[MrRalphMan]

Hi all,

Seems like a common problem the backing lights to the heater controls going, but are they on an inline circuit (ie one goes, they all go.. ala Xmas Tree Lights?) or if one goes should the others remain on?

Had asked a question here (http://www.mkivsupra.net/vbb/showthread.php?t=52238&highlight=heater+light), but was never answered.

Thanks,

Paul.

[Dave]

ask heckler he is the man that knows here ya go his web site http://www.internetwork.org.uk/supra.htm

[MrRalphMan]

Ta

[absxxxx]

theres 3 panel bulbs in total and no its not inline, so if one blows the others should work. on the back side of the control unit you will see two bulb holders (grey) which just turn and pull out. the third bulb is a bit tricky as you will have to unscrew the four cover screws and remove back cover to gain entry:)
hope that makes sense.

[MrRalphMan]

Thanks for the reply..
Oh well, gotta tell the Mrs that I'm going to be gone for hours elbow deep in my dash.. :(