ooh just bought this boost guage, help fitting

[lockys96]

Hello everyone,

I just bought this greddy boost guage, as im not that happy how my car is boosting some times,
http://www.rpmgarage.com/ebay/Greddy_bgauge/P1050073.JPG
http://www.rpmgarage.com/ebay/Greddy_bgauge/P1050078.JPG
http://www.rpmgarage.com/ebay/Greddy_bgauge/P1050079.JPG
http://www.rpmgarage.com/ebay/Greddy_bgauge/P1050072.JPG

some times it feels that the boost aint coming on nearly like a NA, sometimes it seems fine, the turbos sometimes dont seem to come online as they should,

so i thought id get a boost gauge, so i can visualize whats going on, and set the warning level at 1.1bar as my car is not decat etc,

has anyone fitted this type, any help guys

Thanks

Simon

[Soonto"HAS"soop]

Looks like you need to change one of the bulbs in it.

[Soonto"HAS"soop]

As for the fitting, looks like any other. Wiring is probably just permanent 12V, earth, ignition 12V live and a wire for illumination.

The sensor will just plumb into the vacuum lines as anyother gauge also. peak etc set from the control box.

[lockys96]

is it a pain to get the wire through to the engine?

so you think i need a new bulb

[mikeyb10supra]

is it a pain to get the wire through to the engine?

so you think i need a new bulb

If you have a manual then No.....auto yes, you can poke it throughthe firewall and into the drivers footwell

Bulb looks fine to me....make sure you get someone who knows what they are doing with electrics before wiring up, you dont wanna go popping fuses

[lockys96]

yes my cars a manual.

anyone any diagrams, or what to do, as in what to rip out etc