PDA

View Full Version : S/S Hose Clamps

Sharpie
24-04-06, 21:44
Hi Gaz,

You sourced some regular/normal (but, stronger) S/S hose clamps when I fitted the HKS RSK last year.

http://home.btconnect.com/mkivsupra/Clamps.JPG

Top one with a bit of Autosol :D

I'd like to upgrade the two on my top rad pipe as they are not as nice as the ones shown above - so, can you drop me a PM with the price for two ?

I'll buy them anyway :D

I don't like the Mikalor ones.
Sharpie
03-05-06, 11:08
:)
Gaz Walker
03-05-06, 12:38
Missed that sorry Pete.

I'll speak to the supplier - its not something we normally get though as they are miles away and collection only. Let me see if Kevin is going past anytime soon.

Gaz.
Sharpie
11-05-06, 09:32
Cheers Gaz much appreciated!
Sharpie
22-05-06, 23:46
Did you get chance to speak with Kevin ?
Kevin Huntley
23-05-06, 12:53
Hi Pete, Gaz mentioned it to me but I have not been down that way for a few weeks. As soon as I do I will pick some up for ya. ;)

Thanks

Kevin
Sharpie
23-05-06, 13:19
Thanks to both of you!
Sharpie
29-11-06, 23:05
Hi Kevin,

Did you remember ? I know it's been some time...

I would actually need 4 in total as both ends of the rad pipe have two securing it down.

Ta
Sharpie
26-02-07, 01:42
Still hoping you can get some of these for me ?
Gaz Walker
26-02-07, 08:25
I'll remind Kev Peter, we've not been round there for ages now.
Sharpie
26-02-07, 14:35
Cheers, I guess CW will be removing my old ones in a month or so, so, would like to put the new ones on then, if possible.

I know it's out of your way :)
Sharpie
20-03-07, 23:30
Hi Gaz,

Can you tell me what size they are or what range the size xx (mm) - yy (mm) is for this type of clamp ?

I might be able to get some from my local motor factor place - They have loads of car shops up north :)
Gaz Walker
21-03-07, 09:44
Can you tell me what size they are or what range the size xx (mm) - yy (mm) is for this type of clamp ?

I might be able to get some from my local motor factor place - They have loads of car shops up north :)

Hi Pete,

I honestly can't remember - they should exactly the same size as normal Jubilee clips though I would imagine :)

Gaz.
Gaz Walker
29-03-07, 09:42
Hi Pete,

Kev went to the place we got these from on Tuesday and unfortunately they no longer do the S/S ones... sorry :(

Gaz.
Ric
29-03-07, 10:02
Those in the picture look exactly like the ones my local motor spares place do for about 50p each lol
Gaz Walker
29-03-07, 10:59
Those in the picture look exactly like the ones my local motor spares place do for about 50p each lol

Thats because they are probably the same, just stainless steel rather than normal steel :)

Gaz.
Sharpie
29-03-07, 11:17
Hi Pete,

Kev went to the place we got these from on Tuesday and unfortunately they no longer do the S/S ones... sorry :(

Gaz.


That's very kind of him, please pass on my thanks for trying, I know it was a one-off really last time.

Cheers Gaz.
Gaz Walker
29-03-07, 11:53
That's very kind of him, please pass on my thanks for trying, I know it was a one-off really last time.

Cheers Gaz.

Actually, I've just phoned another supplier on the off chance that they have some and luckily, they do!

30mm £1.06
40mm £1.15
50mm £1.26
70mm £1.50
80mm £1.80
100mm £2.20

Plus VAT :)

Gaz.
Sharpie
29-03-07, 12:05
I would actually need 4 in total as both ends of the rad pipe have two securing it down.

Ta


Cool, 4 please :) - do you still have my CC details from last week ?

You might recall that I don't know what size they are ???? You supplied the rad pipe, hose and clamps that are on the car today.

:D
Gaz Walker
29-03-07, 12:26
No worries Pete, I'll sort it. They'll be with us tomorrow.

Gaz.
mk47
29-03-07, 12:44
Gaz just wondering are these the NORMA s/s clamps? :)
Sharpie
29-03-07, 12:46
Very kind Sir!

I already have some good polish to bring them up ;)
Ric
29-03-07, 12:51
Thats because they are probably the same, just stainless steel rather than normal steel :)

Gaz.

yeah they are stainless :D
Gaz Walker
29-03-07, 13:21
Gaz just wondering are these the NORMA s/s clamps? :)

Not a clue who makes them, I'll have a look tomorrow.

I don't get a lot of call for them so this is a one off really, but Pete likes his bling :D

Gaz.
RobSheffield
29-03-07, 13:24
yeah they are stainless :D

It is likely they are just shiny steel Ric, or Zinc/Nickel plated or something.

I know you like cheap shiny things :p
Ric
29-03-07, 13:31
or maybe theres a big bit of POS saying stainless steel clips lol
Gaz Walker
29-03-07, 13:38
I'm sure you can get them from you local motor factor Ric, but around here you can't and I suspect Pete is having trouble getting them too - or its just easier to say "I want these delivered to me, just bill me" :D

Gaz.
Gaz Walker
30-03-07, 12:08
Sent today Pete :)
Sharpie
30-03-07, 12:52
MAGIC Gaz :thumbs:
Ric
30-03-07, 12:57
I'm sure you can get them from you local motor factor Ric, but around here you can't and I suspect Pete is having trouble getting them too - or its just easier to say "I want these delivered to me, just bill me" :D

Gaz.

Yes mate i know i wasnt having a dig or anything just trying to scupper rob saying im cheap :)