SimonB Posted April 24, 2006 Share Posted April 24, 2006 I've managed to pull the wires out of the plug that goes to the boost control solenoid while extracting my turbos the other day! There's a plug on the solenoid with red and black wires going to it, and the plug that plugs into it (which is the one I've pulled off) has green and white wires going into it. Trouble is I don't know which wire connects up to which. So could somebody who has one just have a quick look at this plug and tell me if it goes greenred and white black or greenblack and whitered please? You should be able to tell just by looking at it. Cheers! Quote Link to comment Share on other sites More sharing options...
SimonB Posted April 24, 2006 Author Share Posted April 24, 2006 In fact, I'm fairly sure all the Profec boost controllers use the same solenoid, so anyone with a spec B could probably help too... Quote Link to comment Share on other sites More sharing options...
Jake Posted April 24, 2006 Share Posted April 24, 2006 My Mrs is out in my grey car at the moment. If nobody else sorts you out in the meantime I'll have a butchers for you when she gets back. Should be about 8pm Quote Link to comment Share on other sites More sharing options...
SimonB Posted April 24, 2006 Author Share Posted April 24, 2006 Cheers Jake, not in any great hurry. I've found a pic of a spec B on Ebay which shows the plug and I'm fairly sure white goes to black and green to red but it'd be better to know for sure! Quote Link to comment Share on other sites More sharing options...
Jake Posted April 24, 2006 Share Posted April 24, 2006 Just checked. Yeah it's : White Black Green Red Quote Link to comment Share on other sites More sharing options...
SimonB Posted April 24, 2006 Author Share Posted April 24, 2006 Excellent, cheers Jake, much appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.