Safc1,single, rough settings wanted please!

[mr keef]

This weekend i'm fitting a single T61.I want to run it on 550s and a safc1.I'm BPU at the moment.Does anyone have any rough setting's they could give me for the safc1?,just to get me away,before i get it all set up properly.

Thankyou and regards keef :)

[GeordieSteve]

Got a WB02?

[mr keef]

Got a WB02?
will have soon enough m8

[GeordieSteve]

Should be able to set it up roughly on the road with a WB02 dude

[mr keef]

Just need some settings mate,aint got the wbo2 yet,just to get me away,The safc was from another car so aint got any settings at all

[mr keef]

So i can drive the car off boost,with the 550s and with the safc turned off?to get it set up?i know it will overfuel but is driving possible?

[Robert]

not sure how the car will idle with the 550s fitted and no fuel controller. Im going with similar set up.

[TLicense]

Hasn't somebody done this before and seen that the stock ECU will just about handle the bump up to 550's? You really need to get that WBO2 though, your flying blind without it.

[mr keef]

Hasn't somebody done this before and seen that the stock ECU will just about handle the bump up to 550's? You really need to get that WBO2 though, your flying blind without it.

Ahh i hope so anyone done this??
yea gona have to get 1 sooner rather than later.:( anyone got any prices to supply one pretty cheap?

[bromy]

Have a word with Branners he is running 550 with a safc

[Alex]

No the stock ECU will not run 550's.

Knock about 20% off at idle and it should cope....The 550's are 20%(is my maths right?) bigger than 440's, but it's not that linear across the rev range. I expect you won't need to take anything out at WOT over 4000rpm. Because of the big turbo.

I personally wouldn't dream of doing anything like this without a WB02. Unless you want to blow her up.

[Jake]

anyone got any prices to supply one pretty cheap?

Best price ever : AEM Wideband Group buy £169 (http://www.mkivsupra.net/vbb/showthread.php?t=63541)

[mr keef]

Best price ever : AEM Wideband Group buy £169 (http://www.mkivsupra.net/vbb/showthread.php?t=63541)

Aghhh fek i wish this was sooner!!:( anyone got 1 that they will do for the same price i can pay now,need it for friday :)

[bromy]

Amazing price these were £300 not so long ago

[b'have]

I used a safc with 550s on T61, ROUGH settings were -15% at idle to -25% @ 3000 (1.0 bar) 0@4500. AFRs start to rise above 12.5 0ver 1.4 bar.
The ecu can run 550s without safc for low boost (but will be in the 10s!) In closed loop it will idle around the 13s.
This is with an FSE regulator (which is also going)

[mr keef]

Do ya think im better off leaving the 440s in and just driving down thor off boost?

[Alex]

Do ya think im better off leaving the 440s in and just driving down thor off boost?

Yes...and then take it to a tuner to finish it off...you have flow tested and cleaned the injectors yes??

[mr keef]

they going too chris wilson tommora

[mr keef]

Yes...and then take it to a tuner to finish it off...you have flow tested and cleaned the injectors yes??

Tuner to finish what off?i was thinking of driving down fitting the injectors getting it set up then driving back.

[Clarkey]

AFRs start to rise above 12.5 0ver 1.4 bar.


Isn't that abit lean ? I thought 11.4 - 11.8 was a nice safe AFR.

[Clarkey]

I was thinking of driving down fitting the injectors getting it set up then driving back.

I think that's what Alex meant.

[mr keef]

I think that's what Alex meant.

Ahh i see :)

[b'have]

Isn't that abit lean ? I thought 11.4 - 11.8 was a nice safe AFR.

Yes it is. Thats why I am moving to 650s as I want to boost to >1.4 bar without using mega fuel pressures.

[Clarkey]

I want to boost to >1.4 bar without using mega fuel pressures.

Ah I see. What fuel pressure was your FSE set to ? .

[b'have]

Last setting was 34psi (static)