Jump to content
The mkiv Supra Owners Club

Another Cliffnet question


RedM
 Share

Recommended Posts

I'm trying to figure this out myself. I believe it's something to do with why my voice module isn't appearing either. There's a serial connection which needs to loop between the modules and I'm not sure mine does.

 

Thing is, if you load the software in offline mode this should give you all the options, and I've not seen it there either.

 

If you find out let me know.

 

Ta!

Link to comment
Share on other sites

Pete,

 

Thanks for that. I've had a look and I can't spot it in that version either.

 

What I know is:

1. I have a proximity sensor/warning.

2. It can be changed via the remote.

3. My installer changed it for me.

4. He used software.

5. The help facility actually mentions bar graphs and buttons.

 

It has to be in there somewhere. Maybe only available when working online!

 

Where's Matt Harwood when you need him?

Link to comment
Share on other sites

make a note of all the settings before you change anything " or you'll fu£k it up big style"

It's a very good tip!

Doesn't help that some of the screens seem to return to default values rather than pulling existing values from the alarm though. :eek:

Link to comment
Share on other sites

5. The help facility actually mentions bar graphs and buttons.

 

It has to be in there somewhere. Maybe only available when working online!

I'll spend some time on it again next weekend as I need to do this to stop it annoying everyone as they walk by it.

 

The help facility is about as much use as a chocolate teapot. I was looking for a PDF manual on the Wizard software but couldn't find one.

Link to comment
Share on other sites

It IS in the pro version, cant tell you where (sorry) as I dont have my laptop here.

 

It is def not in the consumer version.

 

Is it the case that if you choose an option that doesn't have prox as standard then the software doesn't load that part?

 

I'm off to try.

Link to comment
Share on other sites

Right, I've had a look at all the systems that I know feature proximity sensors and none of them have an adjustment screen anywhere within the Cliffnet software.

 

The help funtions says it only applies to systems where the prox settings can be changed via the remote but it appears that that is all of them. So why no screen in Cliffnet?

Link to comment
Share on other sites

I have received a reply from Clifford and you got it pretty much spot on, Pete.

 

Dear Martin,

 

Thank you for your email.

 

Unfortunately the sensors cannot be adjusted by the Cliffnet Wizard

software. The settings can only be adjusted by an authorized Clifford

dealer using a remote.

 

Should you require the location/ contact details of your nearest dealer,

please reply to this email stating the town and county you live in.

 

Regards,

Clare Buckley

Customer Services

Directed Electronics

I have sent another reply to them:

Clare,

Thank you for your reply.

As the instructions on how to change the proximity settings are available from the Clifford site I'll use them rather than pay a dealer. Especially as I have paid for the alleged PRO version of the software.

 

Can I also ask why this facility is not available through the software?

 

Regards

Martin

I await a reply!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.