Guest Usmann A Posted March 8, 2006 Share Posted March 8, 2006 Hey guys can do these custom baffles for any exhaust. But had a trial one made up for a BL on mine and its good. Really drops the sound level, and makes the 4inch systems sound a litte more neighbour friendly. what ya think? if i can get intrest then I can make a few up. Quote Link to comment Share on other sites More sharing options...
samsupra37 Posted March 8, 2006 Share Posted March 8, 2006 How much Ali? Quote Link to comment Share on other sites More sharing options...
Guest Usmann A Posted March 8, 2006 Share Posted March 8, 2006 http://putfile.com/pic.php?pic=3/6609084238.jpg&s=x10 Quote Link to comment Share on other sites More sharing options...
Guest Usmann A Posted March 8, 2006 Share Posted March 8, 2006 http://putfile.com/pic.php?pic=3/6609112473.jpg&s=x10 Quote Link to comment Share on other sites More sharing options...
Guest Usmann A Posted March 8, 2006 Share Posted March 8, 2006 £50, but i only have mocks for a BL backbox atm. BTW, that is a prototype, the finished will have stainless nuts and bolts. btw, this has soundproofing material in the muffler too,so its ok kit. Quote Link to comment Share on other sites More sharing options...
Bobbeh Posted March 8, 2006 Share Posted March 8, 2006 £50 for a baffle! Quote Link to comment Share on other sites More sharing options...
Guest Usmann A Posted March 8, 2006 Share Posted March 8, 2006 cos its a custom one bobs, and the more orders i get the cheaper it gets too. remember these are guys running 4inch systems, or exhausts so £50 or cheaper aint going to hurt them. , esp if its made well and does the job. Quote Link to comment Share on other sites More sharing options...
Pig Posted March 8, 2006 Share Posted March 8, 2006 TBH 50 seems a lot. however i seem to have little choice at the moment as dont want to be pulleed all the time and i needed ear plugs for long journies with twins....dread to think what single will be like! Is there anyway of having this with out the holes through the end of the pipe??? e.g just scrwed in at the back??? Quote Link to comment Share on other sites More sharing options...
Bobbeh Posted March 8, 2006 Share Posted March 8, 2006 Its only a bit of sheet metal m8, my friend knocked one up for a massive RX7 pipe for use at the ring, did it for a tenner.... but I dont think he even charged at the end of the day, but that was a one off, so I understand the need to claim back some for the time spent Quote Link to comment Share on other sites More sharing options...
Guest Usmann A Posted March 8, 2006 Share Posted March 8, 2006 you see, this one is actually a proper sound proofed one, taking into account you cant stand near the exhaust, as its just too damn deep, you can feel it.And we dont get people 8-9 house down shouting at me. haha now we can talk to each other while were working round the back. I`agree 50 is expensive, but then again, like i say, they guy i use his time is rather valueable. If i can get a couple in im sure i can get i down quite a bit. http://putfile.com/pic.php?pic=3/6615154552.jpg&s=x10 Quote Link to comment Share on other sites More sharing options...
Pig Posted March 8, 2006 Share Posted March 8, 2006 Im up for one if i can bolt it on just at the back and not the front! Quote Link to comment Share on other sites More sharing options...
Gamer Posted March 8, 2006 Share Posted March 8, 2006 BL sells the baffles for the BL 4" for $50 which works out to just under £30 http://www.supraforums.com/forum/showthread.php?t=343368 Just for comparisons sake of course. Small review of the silencer http://www.supraforums.com/forum/showthread.php?t=345828 Quote Link to comment Share on other sites More sharing options...
Guest Usmann A Posted March 8, 2006 Share Posted March 8, 2006 LOL, thats the states gamer, where they have 4inch tube benders every corner. whereas here its a pain to get 4inch pipe material, unless u buy in big quantities. Remember labour is cheap there compared to here. I didnt know BL made one, so i just got one made up. BL is a better alternative then. Quote Link to comment Share on other sites More sharing options...
Gamer Posted March 8, 2006 Share Posted March 8, 2006 No problem, I realise things cost more over here. I did not think about the availability of 4" tube benders though, good point. Quote Link to comment Share on other sites More sharing options...
b_have Posted March 8, 2006 Share Posted March 8, 2006 I would say thats good value, especially as it is a 'proper' silencer incorporating perforated tube and sound deadening material. Great for beating the Db meters at track days! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.