Jump to content
The mkiv Supra Owners Club

Engine In Bits!!!


Guest clydey1
 Share

Recommended Posts

Guest clydey1

After causing some damage with too much nitrous i finally got round to stripping the head off to see what damage had occured.. At first glance i could see nothing wrong so sent head off for checking and skimming..turns out it was warped but that's not all... while the head was being checked i thought i'd run my own tests on pistons so i filled each piston bore with brake fluid and left it over nite...Checked this morn and sure enough number 2 cylinder had lost some fluid.. Well to get to the point i've now ordered the piston ring set from toyota gonna do all six and glaze the bores while i'm at it.. So the advice is NO NITROUS ladies and gentlemen.. Just wondered if any of you know where i can get an uprated or oversized H/Gasket for a 94 N/A and some Head bolts... Any opinions Please...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.