Thor's stainless dials

Mmmmmm, like the look of these!

http://www.thor-racing.co.uk/Toyota_Supra_MkIV_Dial_Ki-THOR00008.asp

But I'm not sure what they'd look like on a car with a standard pre-facelift interior.

Anyone fitted these and got pics they'd be kind enough to share? I'm undecided what background colour to go for... blue to match my boost gauge, red to match the car etc

IIRC, Dangerous Brain and Carl0s both have those

Thanks Jake.

Unfortunately neither of them have any interior pics in their VB garage! C'mon guys, show off!

http://img163.imageshack.us/img163/2270/searchengine69md.gif

Oi you cheeky git, I've done a few searches

But what I'm looking for is very specific

That's a polite way of saying shove yer button up yer arse

Did you click the button in my post?

Awwww bugger

I hate it when that happens

Thanks Jake.... you may remove the button from where I previously asked you to place it (just wipe it off before you expect me to use it )

In all seriousness cheers, that's what I was looking for.

No probs mate

I got some of the stainless steel dials for my facelift. They reflected too much light, so I sprayed them with matt paint and they look cool now. Obviously you can do em any colour you want

I haven't seen these before and think they look awesome but where can I get a dash bulb colour kit from to match?

I *think* that the kit comes with everything, maybe the backing film provides the different colours?

I mean the rest of the dash. You know, the heater dials and slip cont button etc. Can you get a replacement bulb kit for all that. I don't want half blue and half green.

Good point

I've been told previously that coating light bulbs with nail polish works quite well

Not that I've got any

I mean the rest of the dash. You know, the heater dials and slip cont button etc. Can you get a replacement bulb kit for all that. I don't want half blue and half green.

You have to change the LEDs to do this on the circuit board, all the heater control lights are LEDs. Then you use some EL wire to do the backlights on the buttons. It's a bit of a PITA. There should be a couple of threads on here somewhere about it.

Hmm, maybe I'll just stick with the stock backlight colour, these dials will still look better than the stock ones

I've got some of these but my interior is far from standard.

I've ordered a set of these and the heater dials, can't wait hope it will take years off of the car !!

Not the best pic......

You have to change the LEDs to do this on the circuit board, all the heater control lights are LEDs. Then you use some EL wire to do the backlights on the buttons. It's a bit of a PITA. There should be a couple of threads on here somewhere about it.

Sounds like a right PITA. KennyF you said you've ordered a set with heater dials? What do the heater dials look like?

Not the best pic......

No kidding

Gaz.

I've done the heater dials and replaced my LEDs with red ones. The backlights don't need doing on the heater knobs as thats got the foil on them. Think they were £15. I find in sunny weather with my roof off the glare will blind you a bit if the sun is coming in the roof from behind. I could take a pic of it all at night I guess but heres a pic in daylight (bigger but not much better than jezzies soz)

http://www.showoffyourcar.com/cars/TOYOTA/11816.jpg

http://www.showoffyourcar.com/cars/TOYOTA/11817.jpg

Mate it looks so much better doesn't it. Where did you get the LED's from?

No kidding

 

Gaz.

Now you have all made me want to spend yet more money I dont have lol