DamanC Posted September 21, 2005 Share Posted September 21, 2005 im sure its a simple answer but i cant find it out With regards to the ignition barrel, it seems that there are two types? A raised one? and not a raised one? pics stolen from Nic, hope its ok am o going mad or are there actually 2 types? if so i take it, if one was to swap a raised dash part with a not raised one then it wont fit? Cheers Quote Link to comment Share on other sites More sharing options...
Nic Posted September 21, 2005 Share Posted September 21, 2005 The first one is recessed too it's just a trick of the light making it look like it is proud of the dash. Quote Link to comment Share on other sites More sharing options...
DamanC Posted September 21, 2005 Author Share Posted September 21, 2005 ok cool, what about mine? it definately pops out a bit http://img399.imageshack.us/img399/834/dscf01240yt.jpg Quote Link to comment Share on other sites More sharing options...
Nic Posted September 21, 2005 Share Posted September 21, 2005 now you've got me confused looking at the first 2 photos again I think it's actually the other way around to what I first said, they both stick out. I think it is the shadow on the second photo that is making it looked recessed. I've just parcelled up the part so can't double check but pretty sure that is what the confusion is. Both photos were taken in the dark so the shadows are doing funny things. Quote Link to comment Share on other sites More sharing options...
Guest KARacing Posted September 21, 2005 Share Posted September 21, 2005 I think there are 2 types. Cause one of them come with the hole for "auto side mirror button" Quote Link to comment Share on other sites More sharing options...
Nic Posted September 21, 2005 Share Posted September 21, 2005 I think there are 2 types. Cause one of them come with the hole for "auto side mirror button" Daman and I were talking about the 'ignition barrel' not the button next to it.... Quote Link to comment Share on other sites More sharing options...
Guest KARacing Posted September 21, 2005 Share Posted September 21, 2005 Daman and I were talking about the 'ignition barrel' not the button next to it.... Quote Link to comment Share on other sites More sharing options...
Aerotop Dave Posted September 21, 2005 Share Posted September 21, 2005 The two shots look identical to me. Both are raised. Quote Link to comment Share on other sites More sharing options...
DamanC Posted September 21, 2005 Author Share Posted September 21, 2005 cheers guys appreciated ........ one more thou! that one is gonna replace my one? should be ok? Daman Quote Link to comment Share on other sites More sharing options...
Nic Posted September 21, 2005 Share Posted September 21, 2005 cheers guys appreciated ........ one more thou! that one is gonna replace my one? should be ok? Daman Yes it will fit okay, as all the ignition panels are the same fit, the only differences between the models is the finish and the fact that some have holes for switches to the right of the ignition barrel. Quote Link to comment Share on other sites More sharing options...
DamanC Posted September 21, 2005 Author Share Posted September 21, 2005 thanks Nic, appreciated the holes are gonna be treated to some loverly fibre gash so thay wont be a problem, i was just concerned about the ignition barrel area Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.