Guest kennyf Posted September 19, 2005 Share Posted September 19, 2005 How hard is this to do? Is it too much hassle? Quote Link to comment Share on other sites More sharing options...
mikeyb10supra Posted September 19, 2005 Share Posted September 19, 2005 Run a search matey, you will find loads of info......I think its fairly straight forwards if your competent around the engine bay Quote Link to comment Share on other sites More sharing options...
garetheves Posted September 19, 2005 Share Posted September 19, 2005 Easy peasy, undo 3 bolts that hold each headlight in place, take out all the bulbs and they will ift straight out. The new ones fit in the exact same place with the exact same bolts/nuts. Some people recommend changing the bulb holders to the UK spec because they sometimes dont fit but mind went straight in. Quote Link to comment Share on other sites More sharing options...
Stu_Fraser Posted September 19, 2005 Share Posted September 19, 2005 Yup, straight swap....... My J spec bulbs didnt fit the Uk headlights so they had to be 'modified' with a stanley knife.... In the end i just replaced the bulbs. Quote Link to comment Share on other sites More sharing options...
Guest kennyf Posted September 19, 2005 Share Posted September 19, 2005 Thank you , think I'll be going that way then!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.