stupid bulb question??

Need help how the f**k do they come out?? do they twist or just pull.

and wats the white cord attached to the fog? is that par of that one.

iam gona brake them im sure..................

please help liams just refurbed my lights and want to put back on.

TT steve.

Usually twist out (about 1/6 turn). I got one stuck once and had to use a very small phillips driver to remove the black surround that holds the bulbs in. Three screws I think (be careful not to drop them as they're diddy!).

doesn't apply to fog lights bulbs. They have a spring clip holding them in place and one thin power cable that goes into a connector in the rear cap.

thanks mate, wat about the fogs?? havent the foggest how they come out.....

tt steve

just red it.....

tt steve.

put lights back in now WITH OUT CHANGING F**IN BULBS. couldnt shift them. and have now got a loose connection to the left front head lamp bulb. is there any car companys that make changing a headlight bulb simple as it SHOULD be.?? you ither need to be double jointed or have a fairy sized toolkit to save hand lasarations and broken finger nails!,

why does a 2 minute job take an hour.????????????????????????

oh yeh and lights look spankin...... cheers liam.

tt steve.

Weird. It really is quite simple to do with the headlights in place (if you remove the airbox cover)

Am I right thinking you actually had the lights off the vehicle and the bulbs wouldn't come out?

yes, mind you i couldnt find any plyers and have probebly been too hand fisted........ they wouldnt move i tel thi.

tt steve

I replaced all my bulbs with some more powerful xenon effect ones a few months ago and managed to change all the bulbs except the front fogs. I had to remove the lights to do those. Not a major job but it did take me best part of an hour. But once you have done it once, the second time is much much quicker.

Mike