Apexi SAFC

[Gaz Walker]

Has anyone any settings for a relatively stock car running an SAFC so I don't screw anything up when I install it...

Regards,

Gaz.

[Ian C]

Yeah, zero across the range :)

A relatively stock Supra should be fuelling correctly. The J-spec will measure up to 1.25bar (18psi) and theoretically has a fuel map for it (any experts on the stock ECU map in the house?)

You'll need the AFC when you slap in yer 850's :)

-Ian

[Alex]

The stock ECU maps to 1 bar even though the sensor is capable of reading over that.

The Mines ECU has a map to 1.1bar, apparently.

So if running over 1 bar then any extra you can safely squeeze out at WOT may be of benefit....though I don't know how hard they run at WOT as standard.

[adi]

Is the sensor embedded in the manifold or a seperate unit ie perhaps attached to the bulkhead? I could do with getting hold of one if anyone has one ?

[Martin F]

It's bolted to the side of the inlet manifold.