Toms Supra Posted July 30, 2005 Share Posted July 30, 2005 Does a Supra need, i want to change mine, i will use 50% antifreeze and 50% de ionised water and two bottles (1 pint worth) of Water Wetter. But I dont know how many litres it is. Quote Link to comment Share on other sites More sharing options...
Gaz Walker Posted July 30, 2005 Share Posted July 30, 2005 The capacity of the system is 9.5 litres for a full fill, can be less depending how good the drain is. Regards, Gaz. Quote Link to comment Share on other sites More sharing options...
Gaz Walker Posted July 30, 2005 Share Posted July 30, 2005 BTW are you just using run of the mill coolant? You need to use Toyota OEM Cool Red, comes in 5l bottles, pre-mixed. Its specifically designed for OEM Radiators... Gaz. Quote Link to comment Share on other sites More sharing options...
Steve Posted July 30, 2005 Share Posted July 30, 2005 Yeah as above. Use Toyota Forlife (The red stuff). Do NOT add any water with it, it comes ready to add straight in to the system. Quote Link to comment Share on other sites More sharing options...
JohnA Posted July 30, 2005 Share Posted July 30, 2005 One bottle of Water Wetter should be enough. Don't expect miracles from it, most of the difference comes from running fresher coolant and a weaker mixture perhaps (I run 80% water in the summer, 60% water in the winter) Quote Link to comment Share on other sites More sharing options...
Toms Supra Posted July 30, 2005 Author Share Posted July 30, 2005 Oh I see so just buy two cans of toyota coolant and poor it straight in ok thanks. Quote Link to comment Share on other sites More sharing options...
Steve Posted July 30, 2005 Share Posted July 30, 2005 Thats it mate yeah, just make sure you get the red stuff and NOT the green. Quote Link to comment Share on other sites More sharing options...
Toms Supra Posted July 30, 2005 Author Share Posted July 30, 2005 ok and thanks and finally do i put some in the expansion tank? Quote Link to comment Share on other sites More sharing options...
Steve Posted July 30, 2005 Share Posted July 30, 2005 Yeah there should be some level marks on the tank. Fill up the rad, get all the air out of the system. I just kept squeezing the bottom pipe and the heater pipes to force the air out (with engine running and heater on full). When cold top up the expansion tank and go driving. Just keep your eye on the tank for a while as it may draw more water from it if there is some air still trapped in the system. Quote Link to comment Share on other sites More sharing options...
Toms Supra Posted July 30, 2005 Author Share Posted July 30, 2005 Ok thanks again may sound dumb but do you have to run it for a short while with rad cap off to get air out? Quote Link to comment Share on other sites More sharing options...
Steve Posted July 30, 2005 Share Posted July 30, 2005 I did yeah. You may have to keep topping it up when the air comes out while squeezing the pipes!! Quote Link to comment Share on other sites More sharing options...
Toms Supra Posted July 30, 2005 Author Share Posted July 30, 2005 Ok cool thanks steve and Co! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.