Japanfanatic Posted July 20, 2005 Share Posted July 20, 2005 Hey! Might be a pretty strange question, but does anyone know the size of the hole in the rear bumper of J-Spec Supras, that usually is filled with the license plate? Cheers! Quote Link to comment Share on other sites More sharing options...
merckx Posted July 20, 2005 Share Posted July 20, 2005 Not sure of the width , but the plate I've ordered is 175mm high and this will just cover the hole. Quote Link to comment Share on other sites More sharing options...
Japanfanatic Posted July 20, 2005 Author Share Posted July 20, 2005 Thanks! Quote Link to comment Share on other sites More sharing options...
Jake Posted July 20, 2005 Share Posted July 20, 2005 Not sure of the width , but the plate I've ordered is 175mm high and this will just cover the hole. 520mm maybe? http://www.mkivsupra.net/vbb/showpost.php?p=466692&postcount=1 Quote Link to comment Share on other sites More sharing options...
ivan Posted July 20, 2005 Share Posted July 20, 2005 I just fitted one thats 330mm wide - it overlaps the hole just enough to cover it. Unfortunately I only got it 170mm high, so I've got a gap at the top... Luckily it doesn't show unless you're looking very hard. So, the full answer is that a plate 330mm x 175 should do the trick nicely Fancy plate(s) : Back plate only Registration : R651 xxx Font : Standard UK, Shadow : normal Border : Border 3, Black Bottom text : http://www.mkivsupra.net Logo : Miscellaneous, No logo Back : 330mm x 170mm Honeycombe : no Both white : no Slant : no Comments : Fit reg'n on 2 lines please Price : £13.50 Quote Link to comment Share on other sites More sharing options...
merckx Posted July 20, 2005 Share Posted July 20, 2005 Just looked at mine, the hole is approx 168mm x 320mm I'm still waiting for the plate from Fancyplates - 5 weeks tomorrow. They're totally incompetent , ignored 3 emails. Rang them up 2 weeks ago and they said they're waiting for the larger plastic plates which they should get in last week. I should have got the plate last week. Never use them again. Quote Link to comment Share on other sites More sharing options...
peter richards Posted July 20, 2005 Share Posted July 20, 2005 just been out and measured mine 330 x 182 , and they were from fancyplates Quote Link to comment Share on other sites More sharing options...
tDR Posted July 20, 2005 Share Posted July 20, 2005 Standard Jap size is 7" tall by 14" wide, quite a lot of places do 6.5" tall by 13" wide though which should fit fine too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.