Jump to content
The mkiv Supra Owners Club

A-pillar pods: are they supra-specific?


JohnA
 Share

Recommended Posts

I've tried to fit the A-pillar pod from my ex-calibra, but it doesn't look like it fits very well.

 

Are there pillar pods specifically for the Supra, or they all generic and you cross your fingers that it will fit nicely?

 

 

cheers,

 

John

Link to comment
Share on other sites

I have a greddy one, Not impressed with the fit, I had to trim it a fair ammount to get it to fit.

 

I got a GReddy one off Nic (barg price too :) ) but I haven't tried to fit it yet. How did you attach it to the original A-pillar trim? Those nasty screws of some sticky stuff....?

 

-Ian

Link to comment
Share on other sites

Here's two I found. Like John said the more expensive one needs priming, where as the other one comes ready to be fitted to your car. Also the delivery on both is only £5.00. Not sure whether anyone has bought one!

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7971359974

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7950517370

 

You're best off getting these sorts of bits from a reputable supplier, soooo much of the stuff on ebay is garbage. Even if its fits properly the colour or finish is unlikely to match with the Supra interior.

 

An often quoted phrase here: You pay cheap, you pay twice

Link to comment
Share on other sites

Here's two I found. Like John said the more expensive one needs priming, where as the other one comes ready to be fitted to your car. Also the delivery on both is only £5.00. Not sure whether anyone has bought one!

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7971359974

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7950517370

 

I have just received the 7971359974 (cheaper Model) today, delivered in 2 days, bank transfer and the chap selling them could not have been more helpful.

 

:eyebrows: I will now let you know if it fits !! :eyebrows:

Link to comment
Share on other sites

Here's two I found. Like John said the more expensive one needs priming, where as the other one comes ready to be fitted to your car. Also the delivery on both is only £5.00. Not sure whether anyone has bought one!

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7971359974

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7950517370

 

The shape of these pillar pods is different to the Greddy one, these include the strip that goes around the drivers window. The section that houses the gauge is angular compared to the Greddy version. Not sure if these are intended to replace the stock trim, or fit over the top of the trim.

 

The Greddy one fits over the top of the stock trim and ends at the top of the a-pillar (does not include strip around window.) It also comes with holes ready to fit gauge.

Link to comment
Share on other sites

The one I bought was from Jocktheshockerr item no. 7950517370 and did not have to paint it either just used son of a gun black sort of polish from Halfords.I personally think it is good product fitted just fine except if you do order specify that you need 2 inches more on the door end side. On the first week of Miami opening their workshop at Basingstoke I had the opportunity to see a few supras with pillar pods and this product is just as good as any.To me price is irrelevant it is the delivery on time that is important and this item was delivered exact on time.

Link to comment
Share on other sites

...To me price is irrelevant it is the delivery on time that is important and this item was delivered exact on time.

To me price is relevant mate, same as delivery.

I'm not prepared to pay a premium just because of the F&F hype, or the 'Rip-off-Britain' factor. I'm an old-fashioned tight git I'm afraid, none of this 'cool britania/metro man' bollox :cool:

Link to comment
Share on other sites

I have just received the 7971359974 (cheaper Model) today, delivered in 2 days, bank transfer and the chap selling them could not have been more helpful.

 

:eyebrows: I will now let you know if it fits !! :eyebrows:

 

I tested it today for general fit and I would call it 9/10. The gap at the lower end that slots in to the dash is not a wide so you do have a gap, not really noticable though. The shape of the mould is perfect and the thin section over the door is a good match. The plastic dark colour match is very good also.

 

Shame that they do not have the fixing blocks built in, a little fabrication now required before finished.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.