coza Posted July 31, 2019 Share Posted July 31, 2019 hello, at nurburgring and the power steering has failed again, its only just been refurbed by CW , its a garage whiftbitz and the reservoir is behind the headlight and the power steering cooler is behind the intercooler, it has DEX fluid and today has died again i always get issues with the PS , is the cooler in the wrong place ? Quote Link to comment Share on other sites More sharing options...
evinX Posted July 31, 2019 Share Posted July 31, 2019 Mate if the cooler is behind the intercooler its basically ineffective isnt it. Relocate it so it gets cool air. Should be running dexron iii. The pump is vane pump. Usually the only work they need is the gasket kit as its leaking or a new bearing if it goes. Check the reservoir mesh is clean. If its blocked thatll help burn new fluid quicker Quote Link to comment Share on other sites More sharing options...
coza Posted July 31, 2019 Author Share Posted July 31, 2019 Mate if the cooler is behind the intercooler its basically ineffective isnt it. Relocate it so it gets cool air. Should be running dexron iii. The pump is vane pump. Usually the only work they need is the gasket kit as its leaking or a new bearing if it goes. Check the reservoir mesh is clean. If its blocked thatll help burn new fluid quicker Yes mate running dex3 , where’s best place to put it ? Il have to check it all when I’m back Quote Link to comment Share on other sites More sharing options...
evinX Posted July 31, 2019 Share Posted July 31, 2019 I got a PS cooler i plan to plumb in, going to do mine behind the far Left indicator intake Quote Link to comment Share on other sites More sharing options...
coza Posted July 31, 2019 Author Share Posted July 31, 2019 I got a PS cooler i plan to plumb in, going to do mine behind the far Left indicator intake That’s my current set up but it’s just not working behind the intercooler Quote Link to comment Share on other sites More sharing options...
Burna Posted August 1, 2019 Share Posted August 1, 2019 https://jza80.mkivsupra.net/imports/2019/07/143.jpg That’s my current set up but it’s just not working behind the intercooler /QUOTE] Put your PAS cooler in the right hand air intake, and what i guess is you oil cooler in the left hand air intake. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.