Suprakeith Posted July 7, 2019 Share Posted July 7, 2019 Am after some help with part numbers please, my tweaked new loom has two wrong fitted connectors and would like to get the right ones from Toyota and change them over. Car is 94 na jspec, 1st one is the oil level sensor connector..pic of old one on damaged loom 2nd one is the ignition coil connector Again have picture of old one on damaged loom Any help would be really appreciated Quote Link to comment Share on other sites More sharing options...
Frank Bullitt Posted July 7, 2019 Share Posted July 7, 2019 Every connector has a 5 digit part number on it, just add the prefix 90980 before it. Quote Link to comment Share on other sites More sharing options...
Suprakeith Posted July 7, 2019 Author Share Posted July 7, 2019 Every connector has a 5 digit part number on it, just add the prefix 90980 before it. Thank you for that, I will have closer look at old connectors see if can find any numbers Quote Link to comment Share on other sites More sharing options...
Scooter Posted July 7, 2019 Share Posted July 7, 2019 This is a good link to double check to. http://www.mkivsupra.net/vbb/showthread.php?232824-J-Spec-Engine-Harness-Connector-Details&highlight=Connectors Quote Link to comment Share on other sites More sharing options...
Suprakeith Posted July 7, 2019 Author Share Posted July 7, 2019 This is a good link to double check to. http://www.mkivsupra.net/vbb/showthread.php?232824-J-Spec-Engine-Harness-Connector-Details&highlight=Connectors Thank you will have look through that Quote Link to comment Share on other sites More sharing options...
Delboy52 Posted July 8, 2019 Share Posted July 8, 2019 I had a look through the manual for you and found what I think are your connector part numbers. They don't come with pins from Toyota so best to de-pin what you have as they charge near £6 per terminal! Oil level sensor connector: 90980-10532 Ignition coil on a GE should be: 90980-11246 Your ignition coil connector in the picture looks like 90980-10843 which doesn't appear to be associated to either TT or NA? I added images so you can see the working out. Quote Link to comment Share on other sites More sharing options...
Suprakeith Posted July 8, 2019 Author Share Posted July 8, 2019 (edited) I had a look through the manual for you and found what I think are your connector part numbers. They don't come with pins from Toyota so best to de-pin what you have as they charge near £6 per terminal! Oil level sensor connector: 90980-10532 Ignition coil on a GE should be: 90980-11246 Your ignition coil connector in the picture looks like 90980-10843 which doesn't appear to be associated to either TT or NA? I added images so you can see the working out. Thank you so much for your help, your a diamond. That’s intresting about connector not being na or tt as it’s always been on old loom, will defiantly look into that and may check with bloke at Toyota parts desk. Also just realised that ge ignition plug connects to grey box on ignition bracket, haven’t clue what it’s for at all. Edited July 8, 2019 by Suprakeith (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.