penguin Posted March 25, 2005 Share Posted March 25, 2005 hey guys, got the decat done ... but the exhaust isnt standard one (it says jasma on it tho ) and its not as loud as it used to be .... but, i tried to wire up the vfcc (fuel cut defender) on my soop, and the wiring diagram supplied is totally diffrent ... i mean, my soops pinouts are totally diffrent (yes i did look to see if it was the right one.... Non vvti supra twinturbo) ... help Quote Link to comment Share on other sites More sharing options...
Jake Posted March 25, 2005 Share Posted March 25, 2005 See attached Quote Link to comment Share on other sites More sharing options...
penguin Posted March 25, 2005 Author Share Posted March 25, 2005 thanks dude, but thats the diagram i got with it, but all my pin numbers are totally diffrent, and the power/map wire are not actually at those connections Quote Link to comment Share on other sites More sharing options...
Matt Harwood Posted March 25, 2005 Share Posted March 25, 2005 thanks dude, but thats the diagram i got with it, but all my pin numbers are totally diffrent, and the power/map wire are not actually at those connections Unless you've got a stand alone/aftermarket ECU and had the loom re-wired to suit, I can't see how your pin numbers can be different, let alone the power MAP sensor wire being not being at those locations. The JDM TT wiring looms are all the same, unless you have a VVTi. (97 onwards) I'd re-check if I were you Quote Link to comment Share on other sites More sharing options...
Jake Posted March 25, 2005 Share Posted March 25, 2005 thanks dude, but thats the diagram i got with it, but all my pin numbers are totally diffrent, and the power/map wire are not actually at those connections How do you mean your 'pin numbers are different'? And where are your Power/MAP wires it they aren't in the same place as every other PreFacelift JSpec? A picture and/or more info would help us to help you. Quote Link to comment Share on other sites More sharing options...
penguin Posted March 25, 2005 Author Share Posted March 25, 2005 thanks dudes, i'll take pictures and post em up over the weekend.... its deffo not vvti (as its 1993 model) Quote Link to comment Share on other sites More sharing options...
Matt Harwood Posted March 25, 2005 Share Posted March 25, 2005 I can only assume you're looking at it from the wrong angle. As you're looking in the footwell, with the ECU in situ, the power wire is the bottom right wire/pin on the single plug, (E9. E10 is the double plug that's bolted in) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.