EdMorris Posted January 6, 2019 Share Posted January 6, 2019 Not sure if there is any interest for this, but I have the original clutch that I used on my V8 install for sale. Been lurking in the garage for ages, so thought I'd see if anyone has a need for it, otherwise its scrap. Would be a shame to throw it as its barely used, just been sitting so some minor surface rust here and there. Too extreme for my needs in the end with about 600 ft/lb capacity, so only saw a handful of miles before Lee replaced it with one of CW's modified supra clutches. A pricey unit when it was new, but no longer in manufacture, judging from QM website. I think you can still get the discs though, but you'd have to do a more thorough check. Twin plate, 8.5 inch/21.6cm disks. Fits the V160 input shaft, however this is not a straight swap on a standard Supra. If you know any Ford or Chevy owners, they might be more interested. Thanks. No bolts, just whats in the picture. £200 ono Link to comment Share on other sites More sharing options...
curious Posted January 6, 2019 Share Posted January 6, 2019 Which V8 is the flywheel for ? Thanks Link to comment Share on other sites More sharing options...
EdMorris Posted January 6, 2019 Author Share Posted January 6, 2019 Which V8 is the flywheel for ? I had a custom flywheel made to accept the bolt pattern. I'll check the measurements, hang on.... Link to comment Share on other sites More sharing options...
EdMorris Posted January 6, 2019 Author Share Posted January 6, 2019 See pics for PCD and bolt pattern. 8cm, and 3cm respectively, between hole centres. Hope that helps. Link to comment Share on other sites More sharing options...
curious Posted January 6, 2019 Share Posted January 6, 2019 Which V8 and geatbox combo was this fitted to ? Link to comment Share on other sites More sharing options...
EdMorris Posted January 6, 2019 Author Share Posted January 6, 2019 Which V8 and geatbox combo was this fitted to ? I fitted this initially to my 2UZ conversion, with a 6 speed box via adapter. Link to comment Share on other sites More sharing options...
Recommended Posts