PJJ Posted October 29, 2018 Share Posted October 29, 2018 Hi I am wanting to fit a boost gauge in place of my facelift clock. I need to place the order today, does anyone know what size the facelift clock is so I know which size boost gauge to order? - 52mm or 60mm? Thanks Paul. Quote Link to comment Share on other sites More sharing options...
Sukhy Posted October 29, 2018 Share Posted October 29, 2018 I haven't fitted one myself but IIRC its 52mm. Don't hold me to that though. Someone should be along shortly to confirm. Quote Link to comment Share on other sites More sharing options...
samdale Posted October 29, 2018 Share Posted October 29, 2018 HTH Quote Link to comment Share on other sites More sharing options...
PJJ Posted October 29, 2018 Author Share Posted October 29, 2018 Thanks Sam, looks like 52mm is the one to go for then. Quote Link to comment Share on other sites More sharing options...
samdale Posted October 29, 2018 Share Posted October 29, 2018 Thanks Sam, looks like 52mm is the one to go for then. How do you figure? Are you wanting the FACE of the gauge to fully fit in the hole or something? AFAIK, gauge size is based on the body of the gauge so a 52mm gauge will fit in a 52mm hole and the face will be say 58mm so overhang the edges of the hole. The hole in the facelift dash panel is ~62.5mm so you want a 60mm gauge, which will have a ~66mm face. Quote Link to comment Share on other sites More sharing options...
PJJ Posted October 29, 2018 Author Share Posted October 29, 2018 Yep school boy error Sam on my part, not reading picture properly. Had someone of FB saying use 52mm as that's what they used. I should have put that in my reply sorry mate when i said that 52mm was what i thought it was lol. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.