Engine bay advice??

Found a j-spec tt6 to possibly import, bodywork average, average miles etc, was hoping to get some info on the enginebay, i can see filter and strutbrace but anything else you guys can see that is aftermarket or not oem??? TIA....

Looks like the charcoal canisters have gone that should be up against the firewall on the right of the shot. Cannot see the ABS pump but that might be because its a small largely black picture. Some Supras do have the ABS deleted though.

Thanks Rider, sorry the pic is really poor quality. what charcoal cannisters?

*had a quick look on the forum there.. i take it charcoal cannister removal is a common mod?? I must apologise in advance i am a newbie with all these things

http://www.supraforums.com/forum/showthread.php?485216-Reinstalling-charcoal-canister

Its the large black canister with three pipes going into it in the picture on the above link thread. Not uncommon for people to throw the charcoal filter away. The ABS pump should be just in front.

Aftermarket filter, strut and BOV is all i can see the rest looks std to me.

Looks like a facelift abs pump (cube thing at 45 degree kilter) does that fit in with the car/what you were expecting?

Rad cap looks like it may be leaking a little?

It has a temperature probe/sender in the top rad pipe.

Also an HKS type blow off valve.

Not issues just observations....

Looks like a facelift abs pump (cube thing at 45 degree kilter) does that fit in with the car/what you were expecting?

 

Rad cap looks like it may be leaking a little?

 

It has a temperature probe/sender in the top rad pipe.

 

Also an HKS type blow off valve.

 

Not issues just observations....

Its a 96 car it has facelift tail lights so possibly facelift abs pump would be correct on this car??

Thanks for all the replies, i never noticed the bov

The charcoal canister is there on the pic. You can see the 3 hoses going to it