Supra374 Posted April 25, 2018 Share Posted April 25, 2018 Ok let’s start from the beginning I own a supra na with a auto box and a lsd diff a10b I’m buying a r154 from a chaser This is all I have and the car is auto so I need everything What all do I need to make this conversion happen and is this the right gearbox to get as I’ve been offered a mk3 r154 and a soarer r154 for half the money What’s the best roof to follow as I’m trying to keep the cost down and don’t know a lot about this. I know it’s be covered before and there are lots off different things on the net about it but for me it’s finding the balance I need to get everything rather than me trying to piece together something this guy said and something another guy said if you know what I mean So any help is much appreciated And if anyone can offer me the parts or send me in the right direction to get them would help Quote Link to comment Share on other sites More sharing options...
Supra374 Posted April 26, 2018 Author Share Posted April 26, 2018 Bump Quote Link to comment Share on other sites More sharing options...
edviss Posted April 26, 2018 Share Posted April 26, 2018 (edited) List of what is needed Converting its done on soarer in these videos, but it is pretty much identical. Edited April 26, 2018 by edviss (see edit history) Quote Link to comment Share on other sites More sharing options...
Mk4Gaz Posted April 26, 2018 Share Posted April 26, 2018 You will need: Clutch Clutch pedal Brake pedal (or cut the auto one down) Clutch master cylinder Clutch slave cylinder Clutch fluid line Electronic speedo drive 1jz flywheel Bell housing Shifter R154 (extended shifter if mk3) R154 front half prop Rear cross member Custom downpipe support bracket Gearbox clutch cover plates Pilot bearing Shifter Manual tunnel (or modify the auto one) Manual ecu (or put up with blinking lights) Think that's pretty much it Quote Link to comment Share on other sites More sharing options...
Supra374 Posted April 26, 2018 Author Share Posted April 26, 2018 It comes with the shifter, fork jz bel housing and the other bits in the picture Quote Link to comment Share on other sites More sharing options...
edviss Posted April 26, 2018 Share Posted April 26, 2018 You will need: Clutch Clutch pedal Brake pedal (or cut the auto one down) Clutch master cylinder Clutch slave cylinder Clutch fluid line Electronic speedo drive 1jz flywheel Bell housing Shifter R154 (extended shifter if mk3) R154 front half prop Rear cross member Custom downpipe support bracket Gearbox clutch cover plates Pilot bearing Shifter Manual tunnel (or modify the auto one) Manual ecu (or put up with blinking lights) Think that's pretty much it /QUOTE] hi mate, what do you mean by manual tunnel? thanks Quote Link to comment Share on other sites More sharing options...
Supra374 Posted April 26, 2018 Author Share Posted April 26, 2018 The auto trans tunnel sits in a different position compared to the manual shifter so that’s why u change the trans tunnel or cut a bit out off the auto but that’s shabby looking Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.