squiffy Posted September 3, 2017 Share Posted September 3, 2017 I have fitted a greddy oled boost controller and as you can see from the picture im getting an interesting curve when the 2nd turbo comes In! It's set to run around 18psi I figuree the car was fighting the boost controller so did some searching on here and found the diagram about capping off the ports on the actuator and vsv. I have done that but now I am only getting 11 psi when I'm flat out and the car is noticeably slower. However I now get the correct shaped graph I've tried turning the boost up but it won't increase... If anyone can shed any light on this it would be much appreciated Quote Link to comment Share on other sites More sharing options...
antno Posted October 12, 2017 Share Posted October 12, 2017 You sure you don’t have a boost leak? Pro Quote Link to comment Share on other sites More sharing options...
squiffy Posted October 13, 2017 Author Share Posted October 13, 2017 You sure you don’t have a boost leak? ProYeah I'm sure I don't. I'm also sure I'm a bellend as it turns out I had the hoses the wrong way round on the solenoid....at least it was an easy fix lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.