azam Posted July 17, 2017 Share Posted July 17, 2017 Hey all, would anyone know if the front 4pot ls400 callipers offer more clearance then the uk spec calliper? Quote Link to comment Share on other sites More sharing options...
Supragal Posted July 18, 2017 Share Posted July 18, 2017 As in, are they smaller? I haven't seen them in the metal, but I believe they are smaller than UKs. Quote Link to comment Share on other sites More sharing options...
azam Posted July 18, 2017 Author Share Posted July 18, 2017 As in, are they smaller? I haven't seen them in the metal, but I believe they are smaller than UKs. Yep as in smaller, the uk spec were touching the wheel face. Well skimming it very lightly. And I don't really want to go about using wheel spacers. Was going to order k sports which I am 99% sure offer more clearance but the ls400 callipers are a lot cheaper. Quote Link to comment Share on other sites More sharing options...
Supragal Posted July 18, 2017 Share Posted July 18, 2017 A few people on here run them... hopefully someone can confirm, or if you're really lucky let you try your wheel on over their brakes to be certain. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 18, 2017 Share Posted July 18, 2017 Spunkmeyer has LS400 calipers and isn't that far from you. ALWAYS try a wheel on a car with the brakes you want to run, and vice versa, unless you have proper accurate measurements, and that sort of stuff is very hard to measure accurately as it's all 3D measurements. Quote Link to comment Share on other sites More sharing options...
azam Posted July 18, 2017 Author Share Posted July 18, 2017 Spunkmeyer has LS400 calipers and isn't that far from you. ALWAYS try a wheel on a car with the brakes you want to run, and vice versa, unless you have proper accurate measurements, and that sort of stuff is very hard to measure accurately as it's all 3D measurements. Thanks Chris, I have his old car so I'm sure he won't mind. I will try and have a go at that. And if that fails I can always take the calliper into work and put it on the cmm in metrology to take measurements but again it's time. Quote Link to comment Share on other sites More sharing options...
supra87 Posted July 24, 2017 Share Posted July 24, 2017 Both me and kendo have just fitted ls400 calipers and we've t Both had to fit 10mm spacers on Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 24, 2017 Share Posted July 24, 2017 Do the LS400 calipers fit behind the Lexus twin offset GS300 rims anyone know? Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.