Sheefa Posted May 25, 2017 Share Posted May 25, 2017 Hi all Given my clutch issues in going to have to remove and fully inspect everything. I'm convinced something is knackered with the plates or there's a manufacturing fault given only covered sub 600 miles from new. I want to do an immediate swap over to keep the car running but naturally don't want to bite the bullet on a new clutch if the existing one is to be replaced under warranty or at least until fully inspected to see what's going on. I want to keep the car on road just to drive back home too. Has anyone got a cheap stock/other working clutch and compatible flywheel for a 6 speed I can borrow or purchase. Ideally borrow as I wouldn't be running ANY boost and would return shortly after but if cheap enough don't mind buying one to keep me going. Help! Thanks all. Greg Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted May 25, 2017 Share Posted May 25, 2017 I have a single plate one you can borrow if you want mate? not sure what type as for what its rated to but I was running over 700bhp and over 600 ft lb of torque on it before and had no slip and always gripped perfect anyway gimmie a message if you wanna borrow Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.