Big Mark Posted January 30, 2017 Share Posted January 30, 2017 (edited) Does anyone have a front UK and/or SRT-8 Conversion Lexus ISF brake disc to hand and are able to measure the thickness with a vernier of hub face? I need to know if there is a thickness difference in order to calculate correct offset for new wheels. "Face Thickness" in diagram below. I just need the thickness for the UK disc now as found a data sheep for other. Edited February 1, 2017 by Big Mark (see edit history) Quote Link to comment Share on other sites More sharing options...
Big Mark Posted January 31, 2017 Author Share Posted January 31, 2017 https://www.bremboparts.com/europe/en/catalogue/disc/09-A300-11/pdf So 6.3mm for the Brembo. Anyone got a UK disc to hand and are able to measure it? Quote Link to comment Share on other sites More sharing options...
Big Mark Posted February 1, 2017 Author Share Posted February 1, 2017 Quote Link to comment Share on other sites More sharing options...
Sheefa Posted February 1, 2017 Share Posted February 1, 2017 Very crude measurement with tape measure is bang on 6mm. Quote Link to comment Share on other sites More sharing options...
Big Mark Posted February 2, 2017 Author Share Posted February 2, 2017 Thanks mate. Looks like there's virtually no difference then....... Time to order my front wheels :-) Quote Link to comment Share on other sites More sharing options...
Sheefa Posted February 2, 2017 Share Posted February 2, 2017 Thanks mate. Looks like there's virtually no difference then....... Time to order my front wheels :-) If anything it's a little smaller than the SRTs so yes all good. Happy buying! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.