Guest akrep_bd Posted September 11, 2016 Share Posted September 11, 2016 Wanna but a rota 18"12" wheels but would the rears need wide arches or i it can be on standart body.? Quote Link to comment Share on other sites More sharing options...
abtin90 Posted September 11, 2016 Share Posted September 11, 2016 Whatever wheels you look to buy you need to look at the offset as well as the width of the wheels. Though I very much doubt 12" rota wheels come in an offset for a standard body. If you want wide wheels that'll fit a stock body car, look at CCW's as the offset allows you to run 11.5J at the rear. Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted September 12, 2016 Share Posted September 12, 2016 Im running 18x12 et20 with ridox widearch and they sit flush so id say no they wont fit on stock body and I believe from memory there was only one other offset choice for this wheel which was way off (could be wrong be seem to recall that being the case). As mentioned above though offsets are your key. Quote Link to comment Share on other sites More sharing options...
suprano Posted September 12, 2016 Share Posted September 12, 2016 Yep the other offset choice was 0 but neither fit stock body you will need a wide arch Quote Link to comment Share on other sites More sharing options...
Guest akrep_bd Posted September 12, 2016 Share Posted September 12, 2016 Well thats what i am planing to do buying the ridox wide arches... Do you know who can fit it for me and prices roughly.? İm in london Quote Link to comment Share on other sites More sharing options...
suprano Posted September 12, 2016 Share Posted September 12, 2016 Well down here in Somerset it would b around 2k, just depends on what sort of a job you want Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted September 13, 2016 Share Posted September 13, 2016 Well thats what i am planing to do buying the ridox wide arches... Do you know who can fit it for me and prices roughly.? İm in london Im in Hereford and I went all the way up to Newcastle (6 hour drive each way) to get mine fitted. Its worth travelling to get a good job done especially when it involves cutting your shell. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.