Sheefa Posted June 9, 2016 Share Posted June 9, 2016 As above, removed from my UK single given I'm going ASNU 1100cc for my new turbo setup. Excellent condition, no leaks, car was running over 560fwhp. These should be good for up to 700fwhp based on max 80% DC. Great for a single setup or more headroom for twins. Complete with resistor pack too. Top feed so you'll need a rail, plenty of ones going about on eBay etc. Looking for £200 collected from SRD or you can collect from Birmingham. Picture of injectors. Thanks Greg Link to comment Share on other sites More sharing options...
Sheefa Posted June 11, 2016 Author Share Posted June 11, 2016 Price reduced to £200. Can post for £6 insured. Perfect for going single or on a Jspec as complete with resistor pack. Link to comment Share on other sites More sharing options...
Sheefa Posted June 17, 2016 Author Share Posted June 17, 2016 Price further reduce to £160 including P&P. This is an absolute steal with the resistor pack. Link to comment Share on other sites More sharing options...
Mk4Gaz Posted June 17, 2016 Share Posted June 17, 2016 Hi buddy, do you have the wiring instructions for the resistor pack, to use these on a jspec? Link to comment Share on other sites More sharing options...
Sheefa Posted June 17, 2016 Author Share Posted June 17, 2016 Hi buddy, do you have the wiring instructions for the resistor pack, to use these on a jspec? /QUOTE] Yes mate see step 15 here: http://www.internetwork.org.uk/mechanical/Injectors/Injectors.htm Link to comment Share on other sites More sharing options...
-K1 Posted June 18, 2016 Share Posted June 18, 2016 your box is full.. Link to comment Share on other sites More sharing options...
Sheefa Posted June 18, 2016 Author Share Posted June 18, 2016 Inbox cleared Link to comment Share on other sites More sharing options...
Recommended Posts