Slam Posted February 8, 2016 Share Posted February 8, 2016 Ok, so wanted to do oil change on engine & gear box & new cam cover seals. That all went well until........ The car was up on ramps, so had a look around the under side as not had chance since buy the car. Only to find the driver's side of the rear anti roll bar was rotten & the end had snapped off. Just dangling there qith drop link attached So i guess anyone with old model should be checking theirs now. I can say that i hadn't noticed anything strange, though weather has not bewn that good for driving hard. I'll leave you with the picture. Quote Link to comment Share on other sites More sharing options...
Ric Posted February 8, 2016 Share Posted February 8, 2016 Whoops lol, time for some TRD ones. Probably time to get the subframe out and give it a good checking over if a substantial part like that has snapped due to corrosion Quote Link to comment Share on other sites More sharing options...
Slam Posted February 8, 2016 Author Share Posted February 8, 2016 Yes TRD would be nice. Best start saving pennies. Quote Link to comment Share on other sites More sharing options...
mrboomberang Posted February 8, 2016 Share Posted February 8, 2016 At least you seen it before any hard driving I can see a few of us getting the jacks out today Quote Link to comment Share on other sites More sharing options...
Slam Posted February 8, 2016 Author Share Posted February 8, 2016 At least you seen it before any hard driving I can see a few of us getting the jacks out today Yes good thing, as getting car prepped for Dragon Ball Quote Link to comment Share on other sites More sharing options...
chazuk Posted February 8, 2016 Share Posted February 8, 2016 I would check all your brake/fuel lines also the bit where they appear out of the plastic cover and go up at the rear Quote Link to comment Share on other sites More sharing options...
Supraleeturbo Posted February 8, 2016 Share Posted February 8, 2016 I have a spare stick one to get you by if you need it mate Quote Link to comment Share on other sites More sharing options...
Slam Posted February 8, 2016 Author Share Posted February 8, 2016 I would check all your brake/fuel lines also the bit where they appear out of the plastic cover and go up at the rear Thats my next job Quote Link to comment Share on other sites More sharing options...
Slam Posted February 8, 2016 Author Share Posted February 8, 2016 I have a spare stick one to get you by if you need it mate Will it be made of wood if it is stick I might have hold of a tt one soon. Thanks for the shout though Quote Link to comment Share on other sites More sharing options...
MattP Posted February 8, 2016 Share Posted February 8, 2016 I got laughed at for powder coating mine while it was off but I'm glad I did looking at that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.