PDA

View Full Version : Andrew`s SRD600S Single turbo 6 speed V161 Build



Andrew K
21-11-15, 18:40
Engine type - Single Turbo, 2JZ-GTE

Engine Spec - SRD Stage 2 head, SRD Stage 2 cams 269 profile 9.6mm lift, Stock bottom end
Fully balanced & line honed block

Turbo - Precision T6765 .68ar

Intercooler - Chris Wilson SMIC

Fuel Used - Shell V-Power Nitro+

Injectors - Sard 800cc drop in's

Fuel Pump - Single Walbro 485

Exhaust - 3" HKS Silent Hi-Power, 3" mid pipe & Down pipe

Transmission - V161 & Spec Stage 1 clutch

Ecu - Syvecs S6

Mapped By - SRD & Lee at Devil Developments

Dyno Used - Devil Developments (Dyno Dynamics)

Power Figure - 617.7hp at the Flywheel, 524hp at the wheels

Torque Figure - 510 ft/lb

Boost Pressure - 1.6 Bar

http://www.mkivsupra.net/vbb/attachment.php?attachmentid=206897&stc=1&d=1448131395

Luxluc
21-11-15, 20:20
Good result Andrew :thumbs:

mellonman
21-11-15, 21:15
Nice mate . I have that exact turbo on mine with stock cams and the torque drops off massively , but with them cams your keeping it nice and flat great end result

Andrew K
22-11-15, 01:36
Good result Andrew :thumbs:

Thanks Luc I'm still chuffed to bits with the result I got as more than I was expecting :)

Andrew K
22-11-15, 01:39
Nice mate . I have that exact turbo on mine with stock cams and the torque drops off massively , but with them cams your keeping it nice and flat great end result

Thanks mate, I've had good comments regarding the power / torque figures so hoping that's because of the cams / head work that had been done previously.

j_jza80
25-11-15, 15:19
Great results, great area under the curve. :cool:

My spec is just a little lower than yours with stoxk vvti cams, so it's nice to get an idea of what mine will be like :)