berg Posted November 18, 2015 Share Posted November 18, 2015 Does anyone on here know if xxr wheels have the pockets on the back to accommodate bolt on spacers without the need to cut the stock wheel studs down? I have xxr 531 but i wont be able to check my car for another week or so wondered if anyone on here knows as i know they are a popular wheel Looking to buy 20mm for the front so would prefer bolt ons 10mm for the back but ill change to longer studs for those Quote Link to comment Share on other sites More sharing options...
tony tt Posted November 18, 2015 Share Posted November 18, 2015 I had 5mm hubcentric spacers on my front wheels so they cleared uk brakes. Went on with no issues. Quote Link to comment Share on other sites More sharing options...
jsnlvxr Posted November 18, 2015 Share Posted November 18, 2015 I'm pretty sure they don't unfortunately. Mine don't anyway Quote Link to comment Share on other sites More sharing options...
Supraleeturbo Posted November 18, 2015 Share Posted November 18, 2015 Thought you was selling mate Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted November 19, 2015 Share Posted November 19, 2015 We run 10mm spacers on the front of our XXR 531's, but i think we have ARP longer studs. Quote Link to comment Share on other sites More sharing options...
Big Mark Posted November 19, 2015 Share Posted November 19, 2015 I've got a brand new set of 10mm wider hubcentric spacers I'm going to sell. Made by SuperForma Had them made for my Works wheels so centre fits the Supra 60.1 Hub Bore, 73.1 Wheel Bore. Let me know if interested. Quote Link to comment Share on other sites More sharing options...
berg Posted November 19, 2015 Author Share Posted November 19, 2015 Thought you was selling mate Na not anymore mate We run 10mm spacers on the front of our XXR 531's, but i think we have ARP longer studs. Any rubbing with the spacers on? i thought about 10mm but i think 20mm will fit at a push as mine sit in quite alot, only 8.5j et30 I've got a brand new set of 10mm wider hubcentric spacers I'm going to sell. Made by SuperForma Had them made for my Works wheels so centre fits the Supra 60.1 Hub Bore, 73.1 Wheel Bore. Let me know if interested. Will message you shortly Quote Link to comment Share on other sites More sharing options...
berg Posted November 19, 2015 Author Share Posted November 19, 2015 Ok looks like the bolt on options wont fit without cutting the stock studs down as the back of the wheels doesnt have the gaps to fit the protruding studs in I can get 20mm with longer bolts, would they be fine to use? People keep saying 20mm onwards should be bolt on for safety reasons but they are H&R so cant see them being dangerous to use Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.