FOSTA Posted November 3, 2015 Share Posted November 3, 2015 What aftermarket inlet manifolds are you people running? I'm now looking for a Nice plenum for my supra. I've seen a few cheap ones on eBay but not sure on them. Any recommendations? Pics would be nice too Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted November 3, 2015 Share Posted November 3, 2015 Are you putting the battery in the boot? As most need the battery relocating. The Greddy cast plenum looks like the best value for money. The Veilside ones are a work of art, but are no longer available new and rarely come up for sale. Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted November 3, 2015 Share Posted November 3, 2015 Hypertune is a work of art. I like the greddy type I just looks nice and curves better. Quote Link to comment Share on other sites More sharing options...
Al Massey Posted November 3, 2015 Share Posted November 3, 2015 I'll be fitting my Greddy one soon Quote Link to comment Share on other sites More sharing options...
FOSTA Posted November 3, 2015 Author Share Posted November 3, 2015 Are you putting the battery in the boot? As most need the battery relocating. The Greddy cast plenum looks like the best value for money. The Veilside ones are a work of art, but are no longer available new and rarely come up for sale. Yeah the battery will be going in the boot fella. - - - Updated - - - I'll be fitting my Greddy one soon What's the greddy one? Where do you get them from? Quote Link to comment Share on other sites More sharing options...
Al Massey Posted November 3, 2015 Share Posted November 3, 2015 Yeah the battery will be going in the boot fella. - - - Updated - - - What's the greddy one? Where do you get them from? I bought it from a member on here, used to be on JamieP's old car I'll get you a better pic when I'm next in the garage. Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted November 3, 2015 Share Posted November 3, 2015 Have you considered modifying the stock intake plenum? Dan Cowley did this on my car. Cut it open and opened the interior out quite a bit. Don't have to bother with all the aftermarket kit and modding then. Quote Link to comment Share on other sites More sharing options...
Krister Posted November 4, 2015 Share Posted November 4, 2015 (edited) An aftermarket intake manifold isnt usually needed unless you are running close to 1000hp and most come with a throttle body which is huge, and that makes daily driving harder. They look nice though. I'm running a Titan Motorsports modified stock intake manifold which has had the plenum changed like mwilkinson suggested above. I'm running the stock 65mm throttle body and almost 1300hp, so the stock TB isnt much of a restriction even at those power levels. Would be fun to test a 75mm to see if there's a gain, but most likely not very big. Edited November 4, 2015 by Krister (see edit history) Quote Link to comment Share on other sites More sharing options...
hodge Posted November 4, 2015 Share Posted November 4, 2015 used to be on JamieP's old car It must be worth at least double what it was new then hahahahaha Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.