Guest suprageek Posted October 20, 2015 Share Posted October 20, 2015 http://www.titanmotorsports.com/eispandkostp.html Anyone running these in their car? What's the ride height like, what top mounts are needed ? Thanks Quote Link to comment Share on other sites More sharing options...
Dnk Posted October 20, 2015 Share Posted October 20, 2015 (edited) Eibach pro kit lowers the car by 30 mm front and 25 mm rear if I remember correctly, I had them with new OE Toyota dampers, they have a good progressive spring rate that is just a bit more than stock Eibach front --- 370 to 510 rear 180 to 263 lbs/in Stock UK -------- 430 and the rear 219 lbs/in Edited October 20, 2015 by Dnk (see edit history) Quote Link to comment Share on other sites More sharing options...
mattdavies Posted October 20, 2015 Share Posted October 20, 2015 I have these on my car but not the adjust able Koni. the ride is ok, and the height is adjustable I believe by moving the spring cups up or down. I am using OEM top mounts Quote Link to comment Share on other sites More sharing options...
Guest suprageek Posted October 20, 2015 Share Posted October 20, 2015 Hmm so I'd just need the top mounts and if be good to go, I suppose Toyota would want an arm and a leg for a set Quote Link to comment Share on other sites More sharing options...
jim Posted October 21, 2015 Share Posted October 21, 2015 Pardon my ignorance, but if someone had swapped out stock suspension for (tein) coilovers, would the top mounts have been removed or re-used? If they get removed, I still have the stock shocks and springs with potentially top mounts from my car if you want them Dave Quote Link to comment Share on other sites More sharing options...
Guest suprageek Posted October 21, 2015 Share Posted October 21, 2015 Messaged you Jim on fb messenger Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.