Jump to content
The mkiv Supra Owners Club

Driver seat stopped working?!


millar11
 Share

Recommended Posts

Evening all,

 

Went to adjust my seat earlier and it isn't moving? Seems likes it's jammed?

 

Is the motor goosed? I have another seat in garage, can I replace it with that or is motor etc separate from seat?

 

Any info would be great. Thanks.

Link to comment
Share on other sites

As above, if you look on the floor on the left side toward the front of the seat, you might find the white bung has fallen out. It's basically the size of a 5p coin, 5mm thick, threaded with a cross head on one end. You can hold it in place with your finger to move the seat, but you'll have to nip the seat out to screw it back in properly.

Link to comment
Share on other sites

It holds a gear in place, you can see the end you screw in is hollow, it acts as a spacer/bearing, as you screw it in it pushes into a spindle and holds it in the correct position. Make sure you put a dab of grease in the hole, then just hold it in place so you can move the seat enough to take it out and screw it in properly.

 

Yes this is why the left side is jammed and the right side moves a little. [emoji106]🏻

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.