Jump to content
The mkiv Supra Owners Club

Calling all plumbers, handymen, hobbyists, etc.


Scott
 Share

Recommended Posts

I'm looking for a bit of info as I'm struggling a bit to find a solution.

 

I'm looking to make a bottom drain for my boiler, currently it's a side exit. What fitting can I use for the drain itself? I have a 1/2" female 90 deg elbow for underneath the boiler but I can't find anything that's a "drain" to connect to it. At the moment I've got a reducing bush, that would do the job nicely if it wasn't for the lack of flange..... I just don't think I'll get a good enough seal, even with a washer, due to the lack of flange.

 

Any help would be appreciated :)

 

Scott

Link to comment
Share on other sites

I have an encyclopedic knowledge of plumbing fittings (I wish I was joking :D ), but I can't picture what you're trying to do.

 

Are you talking about the condensate overflow pipe?

 

This. I think..!!

 

Scott, this thread is useless without pics.

 

H.

Link to comment
Share on other sites

I have one of these.....

 

http://www.caterfor.co.uk/images/products-large/CF-CC191.jpg

 

As you can see it has the tap coming out of the side. I'm changing this to drain from the bottom instead of the side..... like this...

 

image

image

 

The kit I currently have is as follows....

 

attachment.php?attachmentid=200622&stc=1&d=1430256100

 

The red box shows the bottom/side of the boiler. The fitting in the 90 deg elbow is the reducing bush that I was going to use, but the hex flange on it is minimal so I can't even use a washer on it. The ideal solution for me would be said reducing bush with a better flange on it.

 

Cheers for the help :)

Link to comment
Share on other sites

Crikey, that's some serious cash :D

 

It's not for water, it's for homebrewing. I'm going to make the boiler into an all-in-one, start to fermenter brew machine. What I need to do is have the option of emptying the brew into a bucket or re-cycling it over the top of the grain. My head tells me that there may be a chemical reaction with the enzymes of the brew, the stainless of the boiler and the brass of the fittings. Everything else I have bought it stainless so I would prefer to keep it that way. Unfortunately I can't afford shipping costs from the US or justify £50+ for a simple fitting. I'm going to go with a straight 1/2" nipple and a half socket, along with a nitrile washer. Hopefully that should see me OK :)

Link to comment
Share on other sites

Do we get samples? :):):) as above stainless is exspensive :(

what about welding stainless fittings you want?

 

I don't weld and I really don't fancy carting around the big ass boiler :D

 

Sending out samples is too costly unfortunately, costs me the bottle and the postage.... ends up way more than a beer lol. Anyone is welcome to sample at the house though :D

Link to comment
Share on other sites

Went with this in the end....

 

http://www.norfolkmarine.co.uk/shop-online/images/4080428l.jpg

 

I've got another query now though......

 

I've got a 3/4" hole that I need to put a temperature probe though. Is there some sort of compression fitting that encloses the inside? I've used similar items with electrical boxes to keep out the moisture but I need something that'll hold the water while allowing the probe through.

 

Cheers

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.